Channel representation within the binary codeplug. More...

#include <gd77_codeplug.hh>

Public Types
enum	Mode { MODE_ANALOG = 0, MODE_DIGITAL = 1 }
	Possible channel types analog (FM) or digital (DMR). More...

enum	Admit { ADMIT_ALWAYS = 0, ADMIT_CH_FREE = 1, ADMIT_COLOR = 2 }
	Possible admit criteria. More...

enum	PrivGroup { PRIVGR_NONE = 0, PRIVGR_53474C39 = 1 }
	Possible privacy settings (unused/forbidden in hamradio). More...

enum	SquelchType { SQ_TIGHT = 0, SQ_NORMAL = 1 }
	Possible squelch settings. More...

enum	Bandwidth { BW_12_5_KHZ = 0, BW_25_KHZ = 1 }
	Possible bandwidths for ananlog channels. More...

enum	Power { POWER_HIGH = 1, POWER_LOW = 0 }
	Possible power settings. More...

Public Member Functions
bool	isValid () const
	Returns `true` if the channel is valid.

void	clear ()
	Clears the channel settings.

double	getRXFrequency () const
	Returns the RX frequency in MHz.

void	setRXFrequency (double f)
	Sets the RX frequency in MHz.

double	getTXFrequency () const
	Returns the TX frequency in MHz.

void	setTXFrequency (double f)
	Sets the TX frequency in MHz.

QString	getName () const
	Returns the channel name.

void	setName (const QString &name)
	Sets the channel name.

Signaling::Code	getRXTone () const
	Returns the CTCSS RX tone.

void	setRXTone (Signaling::Code tone)
	Sets the CTCSS RX tone.

Signaling::Code	getTXTone () const
	Returns the CTCSS TX tone.

void	setTXTone (Signaling::Code tone)
	Sets the CTCSS TX tone.

Channel *	toChannelObj () const
	Constructs a `Channel` object from this codeplug channel.

void	fromChannelObj (const Channel c, const Config conf)
	Resets this codeplug channel from the given `Channel` object.

bool	linkChannelObj (Channel *c, const CodeplugContext &ctx) const
	Links a previously constructed `Channel` object to other object within the generic configuration, for example scan lists etc.

Public Attributes
uint8_t	name [16]
	Channel Name.

uint32_t	rx_frequency
	RX Frequency: 8 digits BCD.

uint32_t	tx_frequency
	TX Frequency: 8 digits BCD.

uint8_t	channel_mode
	Mode: Analog or Digital.

uint16_t	_unused25
	Unused, set to 0.

uint8_t	tot
	TOT in 15sec steps: 0=Infinite.

uint8_t	tot_rekey_delay
	TOT Rekey Delay in seconds [0, 255]s.

uint8_t	admit_criteria
	Admit Criteria: Always, Channel Free or Color Code.

uint8_t	_unused30
	Unused, set to `0x50`.

uint8_t	scan_list_index
	Scan List index: 0=None or index + 1.

uint16_t	ctcss_dcs_receive
	RX CTCSS/DCS setting, 4 digits BCD or 0xffff if disabled.

uint16_t	ctcss_dcs_transmit
	TX CTCSS/DCS setting, 4 digits BCD or 0xffff if disabled.

uint8_t	_unused36
	Unused set to `0x00`.

uint8_t	tx_signaling_syst
	Tx Signaling System: Off, DTMF.

uint8_t	_unused38
	Unused set to `0x00`.

uint8_t	rx_signaling_syst
	Rx Signaling System: Off, DTMF.

uint8_t	_unused40
	Unknown set to `0x16`.

uint8_t	privacy_group
	Privacy Group 0=None, 1=53474c39.

uint8_t	colorcode_tx
	TX Color Code [0,15].

uint8_t	group_list_index
	Group List index 0=None or index+1.

uint8_t	colorcode_rx
	RX Color Code: [0,15] (usually identical to TX colorcode).

uint8_t	emergency_system_index
	Emergency system index, 0=None or index + 1.

uint16_t	contact_name_index
	Contact index, 0=None or index+1.

uint8_t	_unused48: 6
	Unused set to `0x00`.

uint8_t	emergency_alarm_ack: 1
	Emergency alarm ack flag.

uint8_t	data_call_conf: 1
	Data-call confirmed flag.

uint8_t	private_call_conf: 1
	Private call confirmed flag.

uint8_t	_unused49_1: 3
	Unused set to `0b000`.

uint8_t	privacy: 1
	Privacy enabled flag.

uint8_t	_unused49_5: 1
	Unused set to `0b0`.

uint8_t	repeater_slot2: 1
	Repeater Slot 0=slot1 or 1=slot2.

uint8_t	_unused49_7: 1
	Unused set to `0b0`.

uint8_t	dcdm: 1
	Dual capacity direct mode flag (do not use it).

uint8_t	_unused50_1: 4
	Unused set to 0b0000.

uint8_t	non_ste_frequency: 1
	Non STE = Frequency?

uint8_t	_unused50_6: 2
	Unused set to 0b00.

uint8_t	squelch: 1
	Squelch settings (tight or normal).

uint8_t	bandwidth: 1
	Bandwidth 12.5 or 25 kHz.

uint8_t	rx_only: 1
	RX only flag.

uint8_t	talkaround: 1
	Allow talkaround flag.

uint8_t	_unused51_4: 2
	Unused set to 0b00.

uint8_t	vox: 1
	VOX enable flag.

uint8_t	power: 1
	Power either Low or High.

uint32_t	_unused52
	Unused set to 0.