AnytoneCodeplug::ChannelElement Class Reference

Represents the base class for channel encodings in all AnyTone codeplugs. More...

#include <anytone_codeplug.hh>

Inheritance diagram for AnytoneCodeplug::ChannelElement:

Collaboration diagram for AnytoneCodeplug::ChannelElement:

Classes
struct	Offset
	Internal used offsets within the channel element. More...

Public Types
enum class	Mode { Analog = 0 , Digital = 1 , MixedAnalog = 2 , MixedDigital = 3 }
	Defines all possible channel modes, see channelMode. More...
enum	Power { POWER_LOW = 0 , POWER_MIDDLE = 1 , POWER_HIGH = 2 , POWER_TURBO = 3 }
	Defines all possible power settings. More...
enum class	RepeaterMode { Simplex = 0 , Positive = 1 , Negative = 2 }
	Defines all possible repeater modes. More...
enum class	SignalingMode { None = 0 , CTCSS = 1 , DCS = 2 }
	Possible analog signaling modes. More...
enum class	Admit {   Always = 0 , Free = 1 , DifferentColorCode = 2 , SameColorCode = 3 ,   Tone = 1 , Busy = 2 }
	Defines possible admit criteria. More...
enum class	OptSignaling { Off = 0 , DTMF = 1 , TwoTone = 2 , FiveTone = 3 }
	Defines all possible optional signalling settings. More...

Public Member Functions
	ChannelElement (uint8_t *ptr)
	Constructor.
virtual	~ChannelElement ()
	Destructor.
void	clear ()
	Resets the channel.
virtual unsigned	rxFrequency () const
	Returns the RX frequency in Hz.
virtual void	setRXFrequency (unsigned hz)
	Sets the RX frequency in Hz.
virtual unsigned	txOffset () const
	Returns the TX frequency offset in Hz. More...
virtual void	setTXOffset (unsigned hz)
	Sets the TX frequency offset in Hz. More...
virtual unsigned	txFrequency () const
	Returns the TX frequency in Hz.
virtual void	setTXFrequency (unsigned hz)
	Sets the TX frequency indirectly. More...
virtual Mode	mode () const
	Returns the channel mode (analog, digtital, etc).
virtual void	setMode (Mode mode)
	Sets the channel mode.
virtual Channel::Power	power () const
	Returns the channel power.
virtual void	setPower (Channel::Power power)
	Sets the channel power.
virtual FMChannel::Bandwidth	bandwidth () const
	Returns the band width of the channel.
virtual void	setBandwidth (FMChannel::Bandwidth bw)
	Sets the band width of the channel.
virtual RepeaterMode	repeaterMode () const
	Returns the transmit offset direction.
virtual void	setRepeaterMode (RepeaterMode mode)
	Sets the transmit offset direction.
virtual SignalingMode	rxSignalingMode () const
	Returns the RX signaling mode.
virtual void	setRXSignalingMode (SignalingMode mode)
	Sets the RX signaling mode.
virtual Signaling::Code	rxTone () const
	Simplified access to RX signaling (tone).
virtual void	setRXTone (Signaling::Code code)
	Sets the RX signaling (tone).
virtual SignalingMode	txSignalingMode () const
	Returns the TX signaling mode.
virtual void	setTXSignalingMode (SignalingMode mode)
	Sets the TX signaling mode.
virtual Signaling::Code	txTone () const
	Simplified access to TX signaling (tone).
virtual void	setTXTone (Signaling::Code code)
	Sets the RX signaling (tone).
virtual bool	ctcssPhaseReversal () const
	Returns true if the CTCSS phase reversal is enabled.
virtual void	enableCTCSSPhaseReversal (bool enable)
	Enables/disables CTCSS phase reversal.
virtual bool	rxOnly () const
	Returns true if the RX only is enabled.
virtual void	enableRXOnly (bool enable)
	Enables/disables RX only.
virtual bool	callConfirm () const
	Returns true if the call confirm is enabled.
virtual void	enableCallConfirm (bool enable)
	Enables/disables call confirm.
virtual bool	talkaround () const
	Returns true if the talkaround is enabled.
virtual void	enableTalkaround (bool enable)
	Enables/disables talkaround.
virtual bool	txCTCSSIsCustom () const
	Returns true if the TX CTCSS tone frequency is custom (non standard).
virtual Signaling::Code	txCTCSS () const
	Returns the TX CTCSS tone.
virtual void	setTXCTCSS (Signaling::Code tone)
	Sets the TX CTCSS tone.
virtual void	enableTXCustomCTCSS ()
	Enables TX custom CTCSS frequency.
virtual bool	rxCTCSSIsCustom () const
	Returns true if the RX CTCSS tone frequency is custom (non standard).
virtual Signaling::Code	rxCTCSS () const
	Returns the RX CTCSS tone.
virtual void	setRXCTCSS (Signaling::Code tone)
	Sets the RX CTCSS tone.
virtual void	enableRXCustomCTCSS ()
	Enables RX custom CTCSS frequency.
virtual Signaling::Code	txDCS () const
	Returns the TX DCS code.
virtual void	setTXDCS (Signaling::Code code)
	Sets the TX DCS code.
virtual Signaling::Code	rxDCS () const
	Returns the RX DCS code.
virtual void	setRXDCS (Signaling::Code code)
	Sets the RX DCS code.
virtual double	customCTCSSFrequency () const
	Returns the custom CTCSS frequency in Hz.
virtual void	setCustomCTCSSFrequency (double hz)
	Sets the custom CTCSS frequency in Hz.
virtual unsigned	twoToneDecodeIndex () const
	Returns the 2-tone decode index (0-based).
virtual void	setTwoToneDecodeIndex (unsigned idx)
	Sets the 2-tone decode index (0-based).
virtual unsigned	contactIndex () const
	Returns the transmit contact index (0-based).
virtual void	setContactIndex (unsigned idx)
	Sets the transmit contact index (0-based).
virtual unsigned	radioIDIndex () const
	Returns the radio ID index (0-based).
virtual void	setRadioIDIndex (unsigned idx)
	Sets the radio ID index (0-based).
virtual AnytoneFMChannelExtension::SquelchMode	squelchMode () const
	Returns true if the sequelch is silent and false if open.
virtual void	setSquelchMode (AnytoneFMChannelExtension::SquelchMode mode)
	Enables/disables silent squelch.
virtual Admit	admit () const
	Returns the admit criterion.
virtual void	setAdmit (Admit admit)
	Sets the admit criterion.
virtual OptSignaling	optionalSignaling () const
	Returns the optional signalling type.
virtual void	setOptionalSignaling (OptSignaling sig)
	Sets the optional signaling type.
virtual bool	hasScanListIndex () const
	Returns true, if a scan list index is set.
virtual unsigned	scanListIndex () const
	Returns the scan list index (0-based).
virtual void	setScanListIndex (unsigned idx)
	Sets the scan list index (0-based).
virtual void	clearScanListIndex ()
	Clears the scan list index.
virtual bool	hasGroupListIndex () const
	Returns true, if a group list index is set.
virtual unsigned	groupListIndex () const
	Returns the scan list index (0-based).
virtual void	setGroupListIndex (unsigned idx)
	Sets the group list index (0-based).
virtual void	clearGroupListIndex ()
	Clears the group list index.
virtual unsigned	twoToneIDIndex () const
	Returns the two-tone ID index (0-based).
virtual void	setTwoToneIDIndex (unsigned idx)
	Sets the two-tone ID index (0-based).
virtual unsigned	fiveToneIDIndex () const
	Returns the five-tone ID index (0-based).
virtual void	setFiveToneIDIndex (unsigned idx)
	Sets the five-tone ID index (0-based).
virtual unsigned	dtmfIDIndex () const
	Returns the DTFM ID index (0-based).
virtual void	setDTMFIDIndex (unsigned idx)
	Sets the DTMF ID index (0-based).
virtual unsigned	colorCode () const
	Returns the color code.
virtual void	setColorCode (unsigned code)
	Sets the color code.
virtual DMRChannel::TimeSlot	timeSlot () const
	Returns the time slot.
virtual void	setTimeSlot (DMRChannel::TimeSlot ts)
	Sets the time slot.
virtual bool	smsConfirm () const
	Returns true if SMS confirmation is enabled.
virtual void	enableSMSConfirm (bool enable)
	Enables/disables SMS confirmation.
virtual bool	simplexTDMA () const
	Returns true if simplex TDMA is enabled.
virtual void	enableSimplexTDMA (bool enable)
	Enables/disables simplex TDMA confirmation.
virtual bool	adaptiveTDMA () const
	Returns true if adaptive TDMA is enabled.
virtual void	enableAdaptiveTDMA (bool enable)
	Enables/disables adaptive TDMA.
virtual bool	rxAPRS () const
	Returns true if RX APRS is enabled.
virtual void	enableRXAPRS (bool enable)
	Enables/disables RX APRS.
virtual bool	enhancedEncryption () const
	Returns true if enhanced encryption is enabled.
virtual void	enableEnhancedEncryption (bool enable)
	Enables/disables enhanced encryption.
virtual bool	loneWorker () const
	Returns true if lone worker is enabled.
virtual void	enableLoneWorker (bool enable)
	Enables/disables lone worker.
virtual bool	hasEncryptionKeyIndex () const
	Returns true if an encryption key is set.
virtual unsigned	encryptionKeyIndex () const
	Returns the AES (enhanced) encryption key index (0-based).
virtual void	setEncryptionKeyIndex (unsigned idx)
	Sets the AES (enahnced) encryption key index (0-based).
virtual void	clearEncryptionKeyIndex ()
	Clears the encryption key index.
virtual QString	name () const
	Returns the channel name.
virtual void	setName (const QString &name)
	Sets the channel name.
virtual Channel *	toChannelObj (Context &ctx) const
	Constructs a generic Channel object from the codeplug channel.
virtual bool	linkChannelObj (Channel *c, Context &ctx) const
	Links a previously constructed channel to the rest of the configuration.
virtual bool	fromChannelObj (const Channel *c, Context &ctx)
	Initializes this codeplug channel from the given generic configuration.
Public Member Functions inherited from Codeplug::Element
	Element (const Element &other)
	Copy constructor.
virtual	~Element ()
	Destructor.
Element &	operator= (const Element &other)
	Copy assignment.
virtual bool	isValid () const
	Returns true if the pointer is not null.
bool	fill (uint8_t value, unsigned offset=0, int size=-1)
	Fills the memsets the entire element to the given value.
bool	getBit (const Offset::BitOffset &offset) const
	Reads a specific bit at the given byte-offset.
bool	getBit (unsigned offset, unsigned bit) const
	Reads a specific bit at the given byte-offset.
void	setBit (const Offset::BitOffset &offset, bool value=true)
	Sets a specific bit at the given byte-offset.
void	setBit (unsigned offset, unsigned bit, bool value=true)
	Sets a specific bit at the given byte-offset.
void	clearBit (unsigned offset, unsigned bit)
	Clears a specific bit at the given byte-offset.
uint8_t	getUInt2 (unsigned offset, unsigned bit) const
	Reads a 2bit unsigned integer at the given byte- and bit-offset.
void	setUInt2 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 2bit unsigned integer at the given byte- and bit-offset.
uint8_t	getUInt3 (unsigned offset, unsigned bit) const
	Reads a 3bit unsigned integer at the given byte- and bit-offset.
void	setUInt3 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 3bit unsigned integer at the given byte- and bit-offset.
uint8_t	getUInt4 (unsigned offset, unsigned bit) const
	Reads a 4bit unsigned integer at the given byte- and bit-offset.
void	setUInt4 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 4bit unsigned integer at the given byte- and bit-offset.
uint8_t	getUInt5 (unsigned offset, unsigned bit) const
	Reads a 5bit unsigned integer at the given byte- and bit-offset.
void	setUInt5 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 5bit iunsinged nteger at the given byte- and bit-offset.
uint8_t	getUInt6 (unsigned offset, unsigned bit) const
	Reads a 6bit unsigned integer at the given byte- and bit-offset.
void	setUInt6 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 6bit unsigned integer at the given byte- and bit-offset.
uint8_t	getUInt8 (unsigned offset) const
	Reads a 8bit unsigned integer at the given byte- and bit-offset.
void	setUInt8 (unsigned offset, uint8_t value)
	Reads a 8bit unsigned integer at the given byte- and bit-offset.
int8_t	getInt8 (unsigned offset) const
	Reads a 8bit signed integer at the given byte- and bit-offset.
void	setInt8 (unsigned offset, int8_t value)
	Reads a 8bit signed integer at the given byte- and bit-offset.
uint16_t	getUInt16_be (unsigned offset) const
	Reads a 16bit big-endian unsigned integer at the given byte-offset.
uint16_t	getUInt16_le (unsigned offset) const
	Reads a 16bit little-endian unsigned integer at the given byte-offset.
void	setUInt16_be (unsigned offset, uint16_t value)
	Stores a 16bit big-endian unsigned integer at the given byte-offset.
void	setUInt16_le (unsigned offset, uint16_t value)
	Stores a 16bit little-endian unsigned integer at the given byte-offset.
uint32_t	getUInt24_be (unsigned offset) const
	Reads a 24bit big-endian unsigned integer at the given byte-offset.
uint32_t	getUInt24_le (unsigned offset) const
	Reads a 24bit little-endian unsigned integer at the given byte-offset.
void	setUInt24_be (unsigned offset, uint32_t value)
	Stores a 24bit big-endian unsigned integer at the given byte-offset.
void	setUInt24_le (unsigned offset, uint32_t value)
	Stores a 24bit little-endian unsigned integer at the given byte-offset.
uint32_t	getUInt32_be (unsigned offset) const
	Reads a 32bit big-endian unsigned integer at the given byte-offset.
uint32_t	getUInt32_le (unsigned offset) const
	Reads a 32bit little-endian unsigned integer at the given byte-offset.
void	setUInt32_be (unsigned offset, uint32_t value)
	Stores a 32bit big-endian unsigned integer at the given byte-offset.
void	setUInt32_le (unsigned offset, uint32_t value)
	Stores a 32bit little-endian unsigned integer at the given byte-offset.
uint64_t	getUInt64_be (unsigned offset) const
	Reads a 64bit big-endian unsigned integer at the given byte-offset.
uint64_t	getUInt64_le (unsigned offset) const
	Reads a 64bit little-endian unsigned integer at the given byte-offset.
void	setUInt64_be (unsigned offset, uint64_t value)
	Stores a 64bit big-endian unsigned integer at the given byte-offset.
void	setUInt64_le (unsigned offset, uint64_t value)
	Stores a 64bit little-endian unsigned integer at the given byte-offset.
uint8_t	getBCD2 (unsigned offset) const
	Reads a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset.
void	setBCD2 (unsigned offset, uint8_t value)
	Stores a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset.
uint16_t	getBCD4_be (unsigned offset) const
	Reads a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset.
void	setBCD4_be (unsigned offset, uint16_t value)
	Stores a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset.
uint16_t	getBCD4_le (unsigned offset) const
	Reads a 4-digit (2-byte/16bit) BDC value in little-endian at the given byte-offset.
void	setBCD4_le (unsigned offset, uint16_t value)
	Stores a 4-digit (1-byte/16bit) BDC value in little-endian at the given byte-offset.
uint32_t	getBCD8_be (unsigned offset) const
	Reads a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset.
void	setBCD8_be (unsigned offset, uint32_t value)
	Stores a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset.
uint32_t	getBCD8_le (unsigned offset) const
	Reads a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset.
void	setBCD8_le (unsigned offset, uint32_t value)
	Stores a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset.
QString	readASCII (unsigned offset, unsigned maxlen, uint8_t eos=0x00) const
	Reads up to maxlen ASCII chars at the given byte-offset using eos as the string termination char.
void	writeASCII (unsigned offset, const QString &txt, unsigned maxlen, uint8_t eos=0x00)
	Stores up to maxlen ASCII chars at the given byte-offset using eos as the string termination char. More...
QString	readUnicode (unsigned offset, unsigned maxlen, uint16_t eos=0x0000) const
	Reads up to maxlen unicode chars at the given byte-offset using eos as the string termination char.
void	writeUnicode (unsigned offset, const QString &txt, unsigned maxlen, uint16_t eos=0x0000)
	Stores up to maxlen unicode chars at the given byte-offset using eos as the string termination char. More...

Static Public Member Functions
static constexpr unsigned int	size ()
	Returns the size of the element.

Protected Member Functions
	ChannelElement (uint8_t *ptr, unsigned size)
	Hidden constructor.
Protected Member Functions inherited from Codeplug::Element
	Element (uint8_t *ptr, size_t size)
	Hidden constructor. More...

Additional Inherited Members
Protected Attributes inherited from Codeplug::Element
uint8_t *	_data
	Holds the pointer to the element.
size_t	_size
	Holds the size of the element.

Detailed Description

Represents the base class for channel encodings in all AnyTone codeplugs.

Memory layout of encoded channel (0x40 bytes):

     7   6   5   4   3   2   1   0   7   6   5   4   3   2   1   0   7   6   5   4   3   2   1   0   7   6   5   4   3   2   1   0
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
00 | RX Frequency 32bit BCD encoded in big-endian as MMMkkkhh                                                                      |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
04 | Tx Frequency Offset 32bit BCD encoded in big-endian as MMMkkkhh                                                               |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
08 | RMode | 0 |BWd|  PWR  | CMode |TAr|CaC|RXO|CTR|TDC|TCT|RDC|RCT| CTCSS transmit                | CTCSS receive                 |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0c | DCS transmit code, little endian                              | DCS receive code, little endian                               |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
10 | Custom CTCSS frequency in 0.1Hz, little endian                | 2-tone decode index, 0-based, little endian                   |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
14 | Contact index 0-based, little endian                                                                                          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
18 | Radio ID table index.         | 0 |SquelchMode| 0   0   0   0 | 0   0 |OptSig | 0   0 | TxPer | Scan list index               |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
1c | RX Group list index           | 2-tone ID                     | 5-tone ID                     | DTMF ID                       |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
20 | Color code                    |LWK|EEE|RGP|EAT| 0 |EST|SMC|TSL| AES Encryption key            | Name 16 x ASCII 0-padded   ...
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
30  ...                                                                                            | Pad byte set to 0x00          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
34 | Device specific settings                                                                                                   ...
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
3c  ...                                                                                                                            |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+

Field description:
 - RMode: Repater mode where 0=simplex, 1=positive TX offset, 2=negative TX offset.
 - BWd: Band width where 0=narrow (12.5kHz), 1=wide (25kHz).
 - PWR: Power where 0=low, 1=mid, 2=high, 3=turbo.
 - CMode: Channel mode, 0=analog, 1=digital, 2=analog + digi RX, 3=digital + analog RX.
 - TAr: Enable talkaround.
 - CaC: Enable call confirm.
 - RXO: Enable RX only.
 - CTR: Enable CTCSS phase reversal.
 - TDC: Enable TX DCS code.
 - TCT: Enable TX CTCSS tone.
 - RDC: Enable RX DCS code.
 - RCT: Enable RX CTCSS tone.
 - SquelchMode: Squelch mode 0=Carrier, 1=CTCSS/DCS, 2=Optional Signaling, 3=CTCSS/DCS and Optional Signaling,
   4 = CTCSS/DCS or Optional Signaling
 - OptSig: Optional signalling where 0=off, 1=DTMF, 2=2-tone, 3=5-tone
 - TxPer: TX permit/admit criterion, 0=always, 1=colorcode, 2=channel free.
 - LWK: Enable lone worker.
 - EEE: Enable enhanced encryption
 - RGP: Enable RX GPS:
 - EAT: Enable adative TDMA
 - EST: Enable simplex TDMA,
 - SMC: SMS confirmation,
 - TSL: Time slot where 0=TS1, 1=TS2

Member Enumeration Documentation

Admit

enum AnytoneCodeplug::ChannelElement::Admit

strong

Defines possible admit criteria.

Enumerator
Always	For both channel types.
Free	For digital channels.
DifferentColorCode	For digital channels.
SameColorCode	For digital channels.
Tone	For analog channels.
Busy	For analog channels.

Mode

enum AnytoneCodeplug::ChannelElement::Mode

strong

Defines all possible channel modes, see channelMode.

Enumerator
Analog	Analog channel.
Digital	Digital (DMR) channel.
MixedAnalog	Mixed, analog channel with digital RX.
MixedDigital	Mixed, digital channel with analog RX.

OptSignaling

enum AnytoneCodeplug::ChannelElement::OptSignaling

strong

Defines all possible optional signalling settings.

Enumerator
Off	None.
DTMF	Use DTMF.
TwoTone	Use 2-tone.
FiveTone	Use 5-tone.

Power

enum AnytoneCodeplug::ChannelElement::Power

Defines all possible power settings.

Enumerator
POWER_LOW	Low power, usually 1W.
POWER_MIDDLE	Medium power, usually 2.5W.
POWER_HIGH	High power, usually 5W.
POWER_TURBO	Higher power, usually 7W on VHF and 6W on UHF.

RepeaterMode

enum AnytoneCodeplug::ChannelElement::RepeaterMode

strong

Defines all possible repeater modes.

Enumerator
Simplex	Simplex mode, that is TX frequency = RX frequency. tx_offset is ignored.
Positive	Repeater mode with positive tx_offset.
Negative	Repeater mode with negative tx_offset.

SignalingMode

enum AnytoneCodeplug::ChannelElement::SignalingMode

strong

Possible analog signaling modes.

Enumerator
None	None.
CTCSS	Use CTCSS tones.
DCS	Use DCS codes.

Member Function Documentation

setTXFrequency()

void AnytoneCodeplug::ChannelElement::setTXFrequency ( unsigned  hz )

virtual

Sets the TX frequency indirectly.

That is, relative to the RX frequency which must be set first. This method also updates the repeaterMode.

setTXOffset()

void AnytoneCodeplug::ChannelElement::setTXOffset ( unsigned  hz )

virtual

Sets the TX frequency offset in Hz.

This method accepts unsigned values, the sign of the offset frequency is stored in repeaterMode().

txOffset()

unsigned AnytoneCodeplug::ChannelElement::txOffset ( ) const

virtual

Returns the TX frequency offset in Hz.

This method returns an unsigned value, the sign of the offset frequency is stored in repeaterMode().

---

The documentation for this class was generated from the following files:

• /home/hannes/Software/qdmr/lib/anytone_codeplug.hh
• /home/hannes/Software/qdmr/lib/anytone_codeplug.cc