Represents the general config of the radio within the D878UV binary codeplug. More...

#include <d878uv_codeplug.hh>

Inheritance diagram for D878UVCodeplug::GeneralSettingsElement:

[legend]

Collaboration diagram for D878UVCodeplug::GeneralSettingsElement:

[legend]

Classes
struct	KeyFunction
	Device specific key functions. More...

struct	Offset
	Some internal used offsets within the element. More...

struct	TimeZone
	Device specific time zones. More...

Public Member Functions
	GeneralSettingsElement (uint8_t *ptr)
	Constructor.

void	clear ()
	Resets the general settings.

virtual unsigned	transmitTimeout () const
	Returns the transmit timeout in seconds.

virtual void	setTransmitTimeout (unsigned tot)
	Sets the transmit timeout in seconds.

virtual AnytoneDisplaySettingsExtension::Language	language () const
	Returns the UI language.

virtual void	setLanguage (AnytoneDisplaySettingsExtension::Language lang)
	Sets the UI language.

QTimeZone	gpsTimeZone () const
	Returns the GPS time zone.

void	setGPSTimeZone (const QTimeZone &zone)
	Sets the GPS time zone.

virtual Frequency	vfoFrequencyStep () const
	Returns the VFO frequency step in kHz.

virtual void	setVFOFrequencyStep (Frequency kHz)
	Sets the VFO frequency step in kHz.

AnytoneKeySettingsExtension::KeyFunction	funcKeyAShort () const
	Returns the key function for a short press on the function key 1/A.

void	setFuncKeyAShort (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a short press on the function key 1/A.

AnytoneKeySettingsExtension::KeyFunction	funcKeyBShort () const
	Returns the key function for a short press on the function key 2/B.

void	setFuncKeyBShort (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a short press on the function key 2/B.

AnytoneKeySettingsExtension::KeyFunction	funcKeyCShort () const
	Returns the key function for a short press on the function key 3/C.

void	setFuncKeyCShort (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a short press on the function key 3/C.

AnytoneKeySettingsExtension::KeyFunction	funcKey1Short () const
	Returns the key function for a short press on the function key 1.

void	setFuncKey1Short (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a short press on the function key 1.

AnytoneKeySettingsExtension::KeyFunction	funcKey2Short () const
	Returns the key function for a short press on the function key 2.

void	setFuncKey2Short (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a short press on the function key 2.

AnytoneKeySettingsExtension::KeyFunction	funcKeyALong () const
	Returns the key function for a long press on the function key 1.

void	setFuncKeyALong (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a long press on the function key 1.

AnytoneKeySettingsExtension::KeyFunction	funcKeyBLong () const
	Returns the key function for a long press on the function key 2.

void	setFuncKeyBLong (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a long press on the function key 2.

AnytoneKeySettingsExtension::KeyFunction	funcKeyCLong () const
	Returns the key function for a long press on the function key 3.

void	setFuncKeyCLong (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a long press on the function key 3.

AnytoneKeySettingsExtension::KeyFunction	funcKey1Long () const
	Returns the key function for a long press on the function key 1.

void	setFuncKey1Long (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a long press on the function key 1.

AnytoneKeySettingsExtension::KeyFunction	funcKey2Long () const
	Returns the key function for a long press on the function key 2.

void	setFuncKey2Long (AnytoneKeySettingsExtension::KeyFunction func)
	Sets the key function for a long press on the function key 2.

virtual AnytoneSettingsExtension::STEType	steType () const
	Returns the STE (squelch tail eliminate) type.

virtual void	setSTEType (AnytoneSettingsExtension::STEType type)
	Sets the STE (squelch tail eliminate) type.

virtual double	steFrequency () const
	Returns the STE (squelch tail eliminate) frequency setting in Hz. More...

virtual void	setSTEFrequency (double freq)
	Sets the STE (squelch tail eliminate) frequency setting. More...

virtual Interval	groupCallHangTime () const
	Returns the group call hang time in seconds.

virtual void	setGroupCallHangTime (Interval sec)
	Sets the group call hang time in seconds.

virtual Interval	privateCallHangTime () const
	Returns the private call hang time in seconds.

virtual void	setPrivateCallHangTime (Interval sec)
	Sets the private call hang time in seconds.

virtual Interval	preWaveDelay () const
	Returns the pre-wave time in ms.

virtual void	setPreWaveDelay (Interval ms)
	Sets the pre-wave time in ms.

virtual Interval	wakeHeadPeriod () const
	Returns the wake head-period in ms.

virtual void	setWakeHeadPeriod (Interval ms)
	Sets the wake head-period in ms.

virtual unsigned	wfmChannelIndex () const
	Returns the wide-FM (broadcast) channel index.

virtual void	setWFMChannelIndex (unsigned idx)
	Sets the wide-FM (broadcast) channel index.

virtual bool	wfmVFOEnabled () const
	Returns `true` if the WFM RX is in VFO mode.

virtual void	enableWFMVFO (bool enable)
	Enables/disables VFO mode for WFM RX.

virtual unsigned	dtmfToneDuration () const
	Returns the DTMF tone duration in ms.

virtual void	setDTMFToneDuration (unsigned ms)
	Sets the DTMF tone duration in ms.

virtual bool	manDown () const
	Returns `true` if "man down" is enabled.

virtual void	enableManDown (bool enable)
	Enables/disables "man down".

virtual bool	wfmMonitor () const
	Returns `true` if WFM monitor is enabled.

virtual void	enableWFMMonitor (bool enable)
	Enables/disables WFM monitor.

virtual Frequency	tbstFrequency () const
	Returns the TBST frequency.

virtual void	setTBSTFrequency (Frequency freq)
	Sets the TBST frequency.

virtual bool	proMode () const
	Returns `true` if the "pro mode" is enabled.

virtual void	enableProMode (bool enable)
	Enables/disables the "pro mode".

virtual bool	filterOwnID () const
	Returns `true` if the own ID is filtered in call lists.

virtual void	enableFilterOwnID (bool enable)
	Enables/disables filter of own ID in call lists.

virtual bool	remoteStunKill () const
	Returns `true` remote stun/kill is enabled.

virtual void	enableRemoteStunKill (bool enable)
	Enables/disables remote stun/kill.

virtual bool	remoteMonitor () const
	Returns `true` remote monitor is enabled.

virtual void	enableRemoteMonitor (bool enable)
	Enables/disables remote monitor.

virtual AnytoneDMRSettingsExtension::SlotMatch	monitorSlotMatch () const
	Returns the monitor slot match.

virtual void	setMonitorSlotMatch (AnytoneDMRSettingsExtension::SlotMatch match)
	Sets the monitor slot match.

virtual bool	monitorColorCodeMatch () const
	Returns `true` if the monitor matches color code.

virtual void	enableMonitorColorCodeMatch (bool enable)
	Enables/disables monitor color code match.

virtual bool	monitorIDMatch () const
	Returns `true` if the monitor matches ID.

virtual void	enableMonitorIDMatch (bool enable)
	Enables/disables monitor ID match.

virtual bool	monitorTimeSlotHold () const
	Returns `true` if the monitor holds the time slot.

virtual void	enableMonitorTimeSlotHold (bool enable)
	Enables/disables monitor time slot hold.

virtual Interval	manDownDelay () const
	Returns the "man down" delay in seconds.

virtual void	setManDownDelay (Interval sec)
	Sets the "man down" delay in seconds.

virtual unsigned	fmCallHold () const
	Returns the analog call hold in seconds.

virtual void	setFMCallHold (unsigned sec)
	Sets the analog call hold in seconds.

virtual bool	gpsMessageEnabled () const
	Returns `true` if the GPS range reporting is enabled.

virtual void	enableGPSMessage (bool enable)
	Enables/disables GPS range reporting.

virtual bool	maintainCallChannel () const
	Returns `true` if the call channel is maintained.

virtual void	enableMaintainCallChannel (bool enable)
	Enables/disables maintaining the call channel.

virtual unsigned	priorityZoneAIndex () const
	Returns the priority Zone A index.

virtual void	setPriorityZoneAIndex (unsigned idx)
	Sets the priority zone A index.

virtual unsigned	priorityZoneBIndex () const
	Returns the priority Zone B index.

virtual void	setPriorityZoneBIndex (unsigned idx)
	Sets the priority zone B index.

virtual bool	bluetooth () const
	Returns `true` if bluetooth is enabled.

virtual void	enableBluetooth (bool enable)
	Enables/disables bluetooth.

virtual bool	btAndInternalMic () const
	Returns `true` if the internal mic is additionally active when BT is active.

virtual void	enableBTAndInternalMic (bool enable)
	Enables/disables the internal mic when BT is active.

virtual bool	btAndInternalSpeaker () const
	Returns `true` if the internal speaker is additionally active when BT is active.

virtual void	enableBTAndInternalSpeaker (bool enable)
	Enables/disables the internal speaker when BT is active.

virtual bool	pluginRecTone () const
	Returns `true` if the plug-in record tone is enabled.

virtual void	enablePluginRecTone (bool enable)
	Enables/disables the plug-in record tone.

virtual Interval	gpsUpdatePeriod () const
	Returns the GPS ranging interval in seconds.

virtual void	setGPSUpdatePeriod (Interval sec)
	Sets the GPS ranging interval in seconds.

virtual unsigned int	btMicGain () const
	Returns the bluetooth microphone gain [1,10].

virtual void	setBTMicGain (unsigned int gain)
	Sets the bluetooth microphone gain [1,10].

virtual unsigned int	btSpeakerGain () const
	Returns the bluetooth speaker gain [1,10].

virtual void	setBTSpeakerGain (unsigned int gain)
	Sets the bluetooth speaker gain [1,10].

virtual bool	displayChannelNumber () const
	Returns `true` if the channel number is displayed.

virtual void	enableDisplayChannelNumber (bool enable)
	Enables/disables display of channel number.

bool	showCurrentContact () const
	Returns `true` if the current contact is shown.

void	enableShowCurrentContact (bool enable)
	Enables/disables display of current contact.

virtual Interval	autoRoamPeriod () const
	Returns the auto roaming period in minutes.

virtual void	setAutoRoamPeriod (Interval min)
	Sets the auto roaming period in minutes.

bool	keyToneLevelAdjustable () const
	Returns `true` if the key-tone level is adjustable.

unsigned	keyToneLevel () const
	Returns the key-tone level (0=adjustable).

void	setKeyToneLevel (unsigned level)
	Sets the key-tone level.

void	setKeyToneLevelAdjustable ()
	Sets the key-tone level adjustable.

AnytoneDisplaySettingsExtension::Color	callDisplayColor () const
	Returns the display color for callsigns.

void	setCallDisplayColor (AnytoneDisplaySettingsExtension::Color color)
	Sets the display color for callsigns.

bool	gpsUnitsImperial () const
	Returns `true` if the GPS units are imperial.

void	enableGPSUnitsImperial (bool enable)
	Enables/disables imperial GPS units.

bool	knobLock () const
	Returns `true` if the knob is locked.

void	enableKnobLock (bool enable)
	Enables/disables the knob lock.

bool	keypadLock () const
	Returns `true` if the keypad is locked.

void	enableKeypadLock (bool enable)
	Enables/disables the keypad lock.

bool	sidekeysLock () const
	Returns `true` if the sidekeys are locked.

void	enableSidekeysLock (bool enable)
	Enables/disables the sidekeys lock.

bool	keyLockForced () const
	Returns `true` if the "professional" key is locked.

void	enableKeyLockForced (bool enable)
	Enables/disables the "professional" key lock.

virtual Interval	autoRoamDelay () const
	Returns the auto-roam delay in seconds.

virtual void	setAutoRoamDelay (Interval sec)
	Sets the auto-roam delay in seconds.

virtual AnytoneDisplaySettingsExtension::Color	standbyTextColor () const
	Returns the standby text color.

virtual void	setStandbyTextColor (AnytoneDisplaySettingsExtension::Color color)
	Sets the standby text color.

virtual BackgroundImage	standbyBackgroundImage () const
	Returns the standby background image.

virtual void	setStandbyBackgroundImage (D878UVCodeplug::GeneralSettingsElement::BackgroundImage img)
	Sets the standby background image.

bool	showLastHeard () const
	Returns `true` if the last heard is shown while pressing PTT.

void	enableShowLastHeard (bool enable)
	Enables/disables showing last heard.

virtual AnytoneDMRSettingsExtension::SMSFormat	smsFormat () const
	Returns the SMS format.

virtual void	setSMSFormat (AnytoneDMRSettingsExtension::SMSFormat fmt)
	Sets the SMS format.

virtual Frequency	autoRepeaterMinFrequencyVHF () const
	Returns the minimum frequency in Hz for the auto-repeater range in VHF band.

virtual void	setAutoRepeaterMinFrequencyVHF (Frequency Hz)
	Sets the minimum frequency in Hz for the auto-repeater range in VHF band.

virtual Frequency	autoRepeaterMaxFrequencyVHF () const
	Returns the maximum frequency in Hz for the auto-repeater range in VHF band.

virtual void	setAutoRepeaterMaxFrequencyVHF (Frequency Hz)
	Sets the maximum frequency in Hz for the auto-repeater range in VHF band.

virtual Frequency	autoRepeaterMinFrequencyUHF () const
	Returns the minimum frequency in Hz for the auto-repeater range in UHF band.

virtual void	setAutoRepeaterMinFrequencyUHF (Frequency Hz)
	Sets the minimum frequency in Hz for the auto-repeater range in UHF band.

virtual Frequency	autoRepeaterMaxFrequencyUHF () const
	Returns the maximum frequency in Hz for the auto-repeater range in UHF band.

virtual void	setAutoRepeaterMaxFrequencyUHF (Frequency Hz)
	Sets the maximum frequency in Hz for the auto-repeater range in UHF band.

virtual AnytoneAutoRepeaterSettingsExtension::Direction	autoRepeaterDirectionB () const
	Returns the auto-repeater direction for VFO B.

virtual void	setAutoRepeaterDirectionB (AnytoneAutoRepeaterSettingsExtension::Direction dir)
	Sets the auto-repeater direction for VFO B.

virtual bool	fmSendIDAndContact () const
	If enabled, the FM ID is sent together with selected contact.

virtual void	enableFMSendIDAndContact (bool enable)
	Enables/disables sending contact with FM ID.

bool	defaultChannel () const
	Returns `true` if the default boot channel is enabled.

void	enableDefaultChannel (bool enable)
	Enables/disables default boot channel.

unsigned	defaultZoneIndexA () const
	Returns the default zone index (0-based) for VFO A.

void	setDefaultZoneIndexA (unsigned idx)
	Sets the default zone (0-based) for VFO A.

unsigned	defaultZoneIndexB () const
	Returns the default zone index (0-based) for VFO B.

void	setDefaultZoneIndexB (unsigned idx)
	Sets the default zone (0-based) for VFO B.

bool	defaultChannelAIsVFO () const
	Returns `true` if the default channel for VFO A is VFO.

unsigned	defaultChannelAIndex () const
	Returns the default channel index for VFO A. More...

void	setDefaultChannelAIndex (unsigned idx)
	Sets the default channel index for VFO A.

void	setDefaultChannelAToVFO ()
	Sets the default channel for VFO A to be VFO.

bool	defaultChannelBIsVFO () const
	Returns `true` if the default channel for VFO B is VFO.

unsigned	defaultChannelBIndex () const
	Returns the default channel index for VFO B. More...

void	setDefaultChannelBIndex (unsigned idx)
	Sets the default channel index for VFO B.

void	setDefaultChannelBToVFO ()
	Sets the default channel for VFO B to be VFO.

virtual unsigned	defaultRoamingZoneIndex () const
	Returns the default roaming zone index.

virtual void	setDefaultRoamingZoneIndex (unsigned idx)
	Sets the default roaming zone index.

virtual bool	repeaterRangeCheck () const
	Returns `true` if repeater range check is enabled.

virtual void	enableRepeaterRangeCheck (bool enable)
	Enables/disables repeater range check.

virtual Interval	repeaterRangeCheckInterval () const
	Returns the repeater range check period in seconds.

virtual void	setRepeaterRangeCheckInterval (Interval sec)
	Sets the repeater range check interval in seconds.

virtual unsigned	repeaterRangeCheckCount () const
	Returns the number of repeater range checks.

virtual void	setRepeaterRangeCheckCount (unsigned n)
	Sets the number of repeater range checks.

virtual AnytoneRoamingSettingsExtension::RoamStart	roamingStartCondition () const
	Returns the roaming start condition.

virtual void	setRoamingStartCondition (AnytoneRoamingSettingsExtension::RoamStart cond)
	Sets the roaming start condition.

virtual Interval	txBacklightDuration () const
	Returns the backlight duration during TX in seconds.

virtual void	setTXBacklightDuration (Interval sec)
	Sets the backlight duration during TX in seconds.

virtual bool	separateDisplay () const
	Returns `true` if the "separate display" is enabled.

virtual void	enableSeparateDisplay (bool enable)
	Enables/disables "separate display.

bool	keepLastCaller () const
	Returns `true` if the last caller is kept when changing channel.

void	enableKeepLastCaller (bool enable)
	Enables/disables keeping the last caller when changing the channel.

virtual AnytoneDisplaySettingsExtension::Color	channelNameColor () const
	Returns the channel name color.

virtual void	setChannelNameColor (AnytoneDisplaySettingsExtension::Color color)
	Sets the channel name color.

virtual bool	repeaterCheckNotification () const
	Returns `true` if repeater check notification is enabled.

virtual void	enableRepeaterCheckNotification (bool enable)
	Enables/disables repeater check notification.

Interval	rxBacklightDuration () const
	Returns the backlight duration during RX in seconds.

void	setRXBacklightDuration (Interval sec)
	Sets the backlight duration during RX in seconds.

virtual bool	roaming () const
	Returns `true` if roaming is enabled.

virtual void	enableRoaming (bool enable)
	Enables/disables repeater check notification.

virtual Interval	muteDelay () const
	Returns the mute delay in minutes.

virtual void	setMuteDelay (Interval min)
	Sets the mute delay in minutes.

virtual unsigned	repeaterCheckNumNotifications () const
	Returns the number of repeater check notifications.

virtual void	setRepeaterCheckNumNotifications (unsigned num)
	Sets the number of repeater check notifications.

virtual bool	bootGPSCheck () const
	Returns `true` if boot GPS check is enabled.

virtual void	enableBootGPSCheck (bool enable)
	Enables/disables boot GPS check.

virtual bool	bootReset () const
	Returns `true` if boot reset is enabled.

virtual void	enableBootReset (bool enable)
	Enables/disables boot reset.

virtual bool	btHoldTimeEnabled () const
	Returns `true`, if the bluetooth hold time is enabled.

virtual bool	btHoldTimeInfinite () const
	Returns `true`, if the bluetooth hold time is infinite.

virtual Interval	btHoldTime () const
	Returns the bluetooth hold time.

virtual void	setBTHoldTime (Interval interval)
	Sets the bluethooth hold time (1-120s).

virtual void	setBTHoldTimeInfinite ()
	Sets the bluethooth hold time to infinite.

virtual void	disableBTHoldTime ()
	Sets the bluethooth hold time to infinite.

virtual Interval	btRXDelay () const
	Returns the bluetooth RX delay in ms.

virtual void	setBTRXDelay (Interval delay)
	Sets the bluetooth RX delay in ms.

bool	fromConfig (const Flags &flags, Context &ctx)
	Encodes the general settings.

bool	updateConfig (Context &ctx)
	Updates the abstract config from general settings.

bool	linkSettings (RadioSettings *settings, Context &ctx, const ErrorStack &err)
	Links the general settings.

Public Member Functions inherited from D868UVCodeplug::GeneralSettingsElement
	GeneralSettingsElement (uint8_t *ptr)
	Constructor.

virtual AnytonePowerSaveSettingsExtension::PowerSave	powerSave () const
	Returns the power-save mode.

virtual void	setPowerSave (AnytonePowerSaveSettingsExtension::PowerSave mode)
	Sets the power-save mode.

virtual unsigned	voxLevel () const
	Returns the VOX level.

virtual void	setVOXLevel (unsigned level)
	Sets the VOX level.

virtual Interval	voxDelay () const
	Returns the VOX delay in ms.

virtual void	setVOXDelay (Interval ms)
	Sets the VOX delay in ms.

virtual AnytoneAudioSettingsExtension::VoxSource	voxSource () const
	Returns the VOX source.

virtual void	setVOXSource (AnytoneAudioSettingsExtension::VoxSource source)
	Sets the VOX source.

unsigned int	dmrMicGain () const
	Returns the mirophone gain.

void	setDMRMicGain (unsigned int gain)
	Sets the microphone gain.

unsigned	maxSpeakerVolume () const
	Returns the maximum volume.

void	setMaxSpeakerVolume (unsigned level)
	Sets the maximum volume.

virtual unsigned	maxHeadPhoneVolume () const
	Returns the maximum headphone volume.

virtual void	setMaxHeadPhoneVolume (unsigned max)
	Sets the maximum headphone volume.

bool	enhanceAudio () const
	Returns `true` if the audio is "enhanced".

void	enableEnhancedAudio (bool enable)
	Enables/disables "enhanced" audio.

bool	recording () const
	Returns `true` if recording is enabled.

void	enableRecording (bool enable)
	Enables/disables recording.

virtual unsigned	recordingDelay () const
	Returns the recording delay in ms.

virtual void	setRecodringDelay (unsigned ms)
	Sets the recording delay in ms.

AnytoneSettingsExtension::VFOScanType	vfoScanType () const
	Returns the VFO scan type.

void	setVFOScanType (AnytoneSettingsExtension::VFOScanType type)
	Sets the VFO scan type.

Frequency	minVFOScanFrequencyUHF () const
	Returns the minimum VFO scan frequency for the UHF band in Hz.

void	setMinVFOScanFrequencyUHF (Frequency hz)
	Sets the minimum VFO scan frequency for the UHF band in Hz.

Frequency	maxVFOScanFrequencyUHF () const
	Returns the maximum VFO scan frequency for the UHF band in Hz.

void	setMaxVFOScanFrequencyUHF (Frequency hz)
	Sets the maximum VFO scan frequency for the UHF band in Hz.

Frequency	minVFOScanFrequencyVHF () const
	Returns the minimum VFO scan frequency for the VHF band in Hz.

void	setMinVFOScanFrequencyVHF (Frequency hz)
	Sets the minimum VFO scan frequency for the VHF band in Hz.

Frequency	maxVFOScanFrequencyVHF () const
	Returns the maximum VFO scan frequency for the VHF band in Hz.

void	setMaxVFOScanFrequencyVHF (Frequency hz)
	Sets the maximum VFO scan frequency for the VHF band in Hz.

Interval	longPressDuration () const
	Returns the long-press duration in ms.

void	setLongPressDuration (Interval ms)
	Sets the long-press duration in ms.

bool	vfoModeA () const
	Returns `true` if the VFO A is in VFO mode.

void	enableVFOModeA (bool enable)
	Enables/disables VFO mode for VFO A.

bool	vfoModeB () const
	Returns `true` if the VFO B is in VFO mode.

void	enableVFOModeB (bool enable)
	Enables/disables VFO mode for VFO B.

unsigned	memoryZoneA () const
	Returns the memory zone for VFO A.

void	setMemoryZoneA (unsigned zone)
	Sets the memory zone for VFO A.

unsigned	memoryZoneB () const
	Returns the memory zone for VFO B.

void	setMemoryZoneB (unsigned zone)
	Sets the memory zone for VFO B.

bool	gps () const
	Returns `true` if GPS is enabled.

void	enableGPS (bool enable)
	Enables/disables recording.

bool	getGPSPosition () const
	Returns `true` if get GPS position is enabled.

void	enableGetGPSPosition (bool enable)
	Enables/disables get GPS position.

bool	keyToneEnabled () const
	Returns `true`, if the key tone is enabled.

void	enableKeyTone (bool enable)
	Enables/disables the key-tone.

bool	smsAlert () const
	Returns `true` if SMS alert is enabled.

void	enableSMSAlert (bool enable)
	Enables/disables SMS alert.

bool	callAlert () const
	Returns `true` if call alert is enabled.

void	enableCallAlert (bool enable)
	Enables/disables call alert.

bool	dmrTalkPermit () const
	Returns `true` if the talk permit tone is enabled for digital channels.

void	enableDMRTalkPermit (bool enable)
	Enables/disables the talk permit tone for digital channels.

bool	fmTalkPermit () const
	Returns `true` if the talk permit tone is enabled for digital channels.

void	enableFMTalkPermit (bool enable)
	Enables/disables the talk permit tone for analog channels.

bool	dmrResetTone () const
	Returns `true` if the reset tone is enabled for digital calls.

void	enableDMRResetTone (bool enable)
	Enables/disables the reset tone for digital calls.

bool	idleChannelTone () const
	Returns `true` if the idle channel tone is enabled.

void	enableIdleChannelTone (bool enable)
	Enables/disables the idle channel tone.

bool	startupTone () const
	Returns `true` if the startup tone is enabled.

void	enableStartupTone (bool enable)
	Enables/disables the startup tone.

void	callToneMelody (Melody &melody) const
	Returns the call-tone melody.

void	setCallToneMelody (const Melody &melody)
	Sets the call-tone melody.

void	idleToneMelody (Melody &melody) const
	Returns the idle-tone melody.

void	setIdleToneMelody (const Melody &melody)
	Sets the idle-tone melody.

void	resetToneMelody (Melody &melody) const
	Returns the reset-tone melody.

void	setResetToneMelody (const Melody &melody)
	Sets the reset-tone melody.

bool	activeChannelB () const
	Returns `true` if the active channel is VFO B.

void	enableActiveChannelB (bool enable)
	Enables/disables VFO B as the active channel.

bool	subChannel () const
	Returns `true` if sub channel is enabled.

void	enableSubChannel (bool enable)
	Enables/disables sub channel.

Interval	menuExitTime () const
	Returns the menu exit time in seconds.

void	setMenuExitTime (Interval intv)
	Sets the menu exit time in seconds.

bool	callEndPrompt () const
	Returns `true` if the call-end prompt is enabled.

void	enableCallEndPrompt (bool enable)
	Enables/disables the call-end prompt.

bool	volumeChangePrompt () const
	Returns `true` if the volume change prompt is enabled.

void	enableVolumeChangePrompt (bool enable)
	Enables/disables the volume change prompt.

AnytoneDisplaySettingsExtension::LastCallerDisplayMode	lastCallerDisplayMode () const
	Returns the last-caller display mode.

void	setLastCallerDisplayMode (AnytoneDisplaySettingsExtension::LastCallerDisplayMode mode)
	Sets the last-caller display mode.

bool	displayClock () const
	Returns `true` if the clock is shown.

void	enableDisplayClock (bool enable)
	Enables/disables clock display.

bool	displayCall () const
	Returns `true` if the call is displayed instead of the name.

void	enableDisplayCall (bool enable)
	Enables/disables call display.

unsigned	brightness () const
	Returns the display brightness.

void	setBrightness (unsigned level)
	Sets the display brightness.

virtual bool	backlightPermanent () const
	Returns `true` if the backlight is always on.

virtual void	enableBacklightPermanent ()
	Sets the backlight to permanent (always on).

AnytoneAutoRepeaterSettingsExtension::Direction	autoRepeaterDirectionA () const
	Returns the auto repeater offset direction for VFO A.

void	setAutoRepeaterDirectionA (AnytoneAutoRepeaterSettingsExtension::Direction dir)
	Sets the auto-repeater offset direction for VFO A.

bool	hasAutoRepeaterOffsetFrequencyIndexUHF () const
	Returns `true` if the auto-repeater offset frequency for UHF is set.

unsigned	autoRepeaterOffsetFrequencyIndexUHF () const
	Returns the auto-repeater offset frequency index for UHF.

void	setAutoRepeaterOffsetFrequenyIndexUHF (unsigned idx)
	Sets the auto-repeater offset frequency index for UHF.

void	clearAutoRepeaterOffsetFrequencyIndexUHF ()
	Clears the auto-repeater offset frequency index for UHF.

bool	hasAutoRepeaterOffsetFrequencyIndexVHF () const
	Returns `true` if the auto-repeater offset frequency for VHF is set.

unsigned	autoRepeaterOffsetFrequencyIndexVHF () const
	Returns the auto-repeater offset frequency index for UHF.

void	setAutoRepeaterOffsetFrequenyIndexVHF (unsigned idx)
	Sets the auto-repeater offset frequency index for VHF.

void	clearAutoRepeaterOffsetFrequencyIndexVHF ()
	Clears the auto-repeater offset frequency index for VHF.

Public Member Functions inherited from AnytoneCodeplug::GeneralSettingsElement
virtual bool	displayFrequency () const
	Returns `true` if the radio displays frequecies instead of channels is enabled.

virtual void	enableDisplayFrequency (bool enable)
	Enables/disables the frequency display.

virtual bool	autoKeyLock () const
	Returns `true` if auto key-lock is enabled.

virtual void	enableAutoKeyLock (bool enable)
	Enables/disables auto key-lock.

virtual Interval	autoShutdownDelay () const
	Returns the auto-shutdown delay in minutes.

virtual void	setAutoShutdownDelay (Interval min)
	Sets the auto-shutdown delay in minutes.

virtual AnytoneBootSettingsExtension::BootDisplay	bootDisplay () const
	Returns the boot display mode.

virtual void	setBootDisplay (AnytoneBootSettingsExtension::BootDisplay mode)
	Sets the boot display mode.

virtual bool	bootPassword () const
	Returns `true` if boot password is enabled.

virtual void	enableBootPassword (bool enable)
	Enables/disables boot password.

virtual unsigned	squelchLevelA () const
	Squelch level of VFO A, (0=off).

virtual void	setSquelchLevelA (unsigned level)
	Returns the squelch level for VFO A, (0=off).

virtual unsigned	squelchLevelB () const
	Squelch level of VFO B, (0=off).

virtual void	setSquelchLevelB (unsigned level)
	Returns the squelch level for VFO B, (0=off).

Public Member Functions inherited from Codeplug::Element
	Element (const Element &other)
	Copy constructor.

virtual	~Element ()
	Destructor.

Element &	operator= (const Element &other)
	Copy assignment.

virtual bool	isValid () const
	Returns `true` if the pointer is not null.

bool	fill (uint8_t value, unsigned offset=0, int size=-1)
	Fills the memsets the entire element to the given value.

bool	getBit (const Offset::BitOffset &offset) const
	Reads a specific bit at the given byte-offset.

bool	getBit (unsigned offset, unsigned bit) const
	Reads a specific bit at the given byte-offset.

void	setBit (const Offset::BitOffset &offset, bool value=true)
	Sets a specific bit at the given byte-offset.

void	setBit (unsigned offset, unsigned bit, bool value=true)
	Sets a specific bit at the given byte-offset.

void	clearBit (unsigned offset, unsigned bit)
	Clears a specific bit at the given byte-offset.

uint8_t	getUInt2 (unsigned offset, unsigned bit) const
	Reads a 2bit unsigned integer at the given byte- and bit-offset.

void	setUInt2 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 2bit unsigned integer at the given byte- and bit-offset.

uint8_t	getUInt3 (unsigned offset, unsigned bit) const
	Reads a 3bit unsigned integer at the given byte- and bit-offset.

void	setUInt3 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 3bit unsigned integer at the given byte- and bit-offset.

uint8_t	getUInt4 (unsigned offset, unsigned bit) const
	Reads a 4bit unsigned integer at the given byte- and bit-offset.

void	setUInt4 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 4bit unsigned integer at the given byte- and bit-offset.

uint8_t	getUInt5 (unsigned offset, unsigned bit) const
	Reads a 5bit unsigned integer at the given byte- and bit-offset.

void	setUInt5 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 5bit iunsinged nteger at the given byte- and bit-offset.

uint8_t	getUInt6 (unsigned offset, unsigned bit) const
	Reads a 6bit unsigned integer at the given byte- and bit-offset.

void	setUInt6 (unsigned offset, unsigned bit, uint8_t value)
	Stores a 6bit unsigned integer at the given byte- and bit-offset.

uint8_t	getUInt8 (unsigned offset) const
	Reads a 8bit unsigned integer at the given byte- and bit-offset.

void	setUInt8 (unsigned offset, uint8_t value)
	Reads a 8bit unsigned integer at the given byte- and bit-offset.

int8_t	getInt8 (unsigned offset) const
	Reads a 8bit signed integer at the given byte- and bit-offset.

void	setInt8 (unsigned offset, int8_t value)
	Reads a 8bit signed integer at the given byte- and bit-offset.

uint16_t	getUInt16_be (unsigned offset) const
	Reads a 16bit big-endian unsigned integer at the given byte-offset.

uint16_t	getUInt16_le (unsigned offset) const
	Reads a 16bit little-endian unsigned integer at the given byte-offset.

void	setUInt16_be (unsigned offset, uint16_t value)
	Stores a 16bit big-endian unsigned integer at the given byte-offset.

void	setUInt16_le (unsigned offset, uint16_t value)
	Stores a 16bit little-endian unsigned integer at the given byte-offset.

uint32_t	getUInt24_be (unsigned offset) const
	Reads a 24bit big-endian unsigned integer at the given byte-offset.

uint32_t	getUInt24_le (unsigned offset) const
	Reads a 24bit little-endian unsigned integer at the given byte-offset.

void	setUInt24_be (unsigned offset, uint32_t value)
	Stores a 24bit big-endian unsigned integer at the given byte-offset.

void	setUInt24_le (unsigned offset, uint32_t value)
	Stores a 24bit little-endian unsigned integer at the given byte-offset.

uint32_t	getUInt32_be (unsigned offset) const
	Reads a 32bit big-endian unsigned integer at the given byte-offset.

uint32_t	getUInt32_le (unsigned offset) const
	Reads a 32bit little-endian unsigned integer at the given byte-offset.

void	setUInt32_be (unsigned offset, uint32_t value)
	Stores a 32bit big-endian unsigned integer at the given byte-offset.

void	setUInt32_le (unsigned offset, uint32_t value)
	Stores a 32bit little-endian unsigned integer at the given byte-offset.

uint64_t	getUInt64_be (unsigned offset) const
	Reads a 64bit big-endian unsigned integer at the given byte-offset.

uint64_t	getUInt64_le (unsigned offset) const
	Reads a 64bit little-endian unsigned integer at the given byte-offset.

void	setUInt64_be (unsigned offset, uint64_t value)
	Stores a 64bit big-endian unsigned integer at the given byte-offset.

void	setUInt64_le (unsigned offset, uint64_t value)
	Stores a 64bit little-endian unsigned integer at the given byte-offset.

uint8_t	getBCD2 (unsigned offset) const
	Reads a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset.

void	setBCD2 (unsigned offset, uint8_t value)
	Stores a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset.

uint16_t	getBCD4_be (unsigned offset) const
	Reads a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset.

void	setBCD4_be (unsigned offset, uint16_t value)
	Stores a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset.

uint16_t	getBCD4_le (unsigned offset) const
	Reads a 4-digit (2-byte/16bit) BDC value in little-endian at the given byte-offset.

void	setBCD4_le (unsigned offset, uint16_t value)
	Stores a 4-digit (1-byte/16bit) BDC value in little-endian at the given byte-offset.

uint32_t	getBCD8_be (unsigned offset) const
	Reads a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset.

void	setBCD8_be (unsigned offset, uint32_t value)
	Stores a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset.

uint32_t	getBCD8_le (unsigned offset) const
	Reads a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset.

void	setBCD8_le (unsigned offset, uint32_t value)
	Stores a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset.

QString	readASCII (unsigned offset, unsigned maxlen, uint8_t eos=0x00) const
	Reads up to `maxlen` ASCII chars at the given byte-offset using `eos` as the string termination char.

void	writeASCII (unsigned offset, const QString &txt, unsigned maxlen, uint8_t eos=0x00)
	Stores up to `maxlen` ASCII chars at the given byte-offset using `eos` as the string termination char. More...

QString	readUnicode (unsigned offset, unsigned maxlen, uint16_t eos=0x0000) const
	Reads up to `maxlen` unicode chars at the given byte-offset using `eos` as the string termination char.

void	writeUnicode (unsigned offset, const QString &txt, unsigned maxlen, uint16_t eos=0x0000)
	Stores up to `maxlen` unicode chars at the given byte-offset using `eos` as the string termination char. More...

Static Public Member Functions
static constexpr unsigned int	size ()
	Returns the size of the element.

Static Public Member Functions inherited from D868UVCodeplug::GeneralSettingsElement
static constexpr unsigned int	size ()
	Returns the size of the element.

Protected Types
enum	FreqStep { FREQ_STEP_2_5kHz = 0 , FREQ_STEP_5kHz = 1 , FREQ_STEP_6_25kHz = 2 , FREQ_STEP_10kHz = 3 , FREQ_STEP_12_5kHz = 4 , FREQ_STEP_20kHz = 5 , FREQ_STEP_25kHz = 6 , FREQ_STEP_50kHz = 7 }
	Possible VFO frequency steps. More...

enum	DTMFDuration { DTMF_DUR_50ms = 0 , DTMF_DUR_100ms = 1 , DTMF_DUR_200ms = 2 , DTMF_DUR_300ms = 3 , DTMF_DUR_500ms = 4 }
	DTMF signalling durations.

enum class	TBSTFrequency { Hz1000 = 0 , Hz1450 = 1 , Hz1750 = 2 , Hz2100 = 3 }
	TBST (open repeater) frequencies.

enum class	STEFrequency { Off = 0 , Hz55_2 = 1 , Hz259_2 = 2 }
	All possible STE (squelch tail eliminate) frequencies.

enum class	BackgroundImage { Default =0 , Custom1 =1 , Custom2 =2 }
	Possible background images.

Protected Member Functions
	GeneralSettingsElement (uint8_t *ptr, unsigned size)
	Hidden constructor.

Protected Member Functions inherited from D868UVCodeplug::GeneralSettingsElement
	GeneralSettingsElement (uint8_t *ptr, unsigned size)
	Hidden constructor.

Protected Member Functions inherited from AnytoneCodeplug::GeneralSettingsElement
	GeneralSettingsElement (uint8_t *ptr, unsigned size)
	Hidden constructor.

Protected Member Functions inherited from Codeplug::Element
	Element (uint8_t *ptr, size_t size)
	Hidden constructor. More...

Additional Inherited Members
Public Types inherited from AnytoneCodeplug::GeneralSettingsElement
enum class	AutoShutdown { Off = 0 , After10min = 1 , After30min = 2 , After60min = 3 , After120min = 4 }
	Possible automatic shutdown delays.

Protected Attributes inherited from Codeplug::Element
uint8_t *	_data
	Holds the pointer to the element.

size_t	_size
	Holds the size of the element.

Detailed Description

Represents the general config of the radio within the D878UV binary codeplug.

This class implements only the differences to the generic AnytonCodeplug::GeneralSettingsElement.

Binary encoding of the general settings (size 0x00f0 bytes):

     7   6   5   4   3   2   1   0   7   6   5   4   3   2   1   0   7   6   5   4   3   2   1   0   7   6   5   4   3   2   1   0
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
00 | Enable key tone               | Display mode                  | Enable automatic key lock     | Automatic shutdown time       |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
04 | Transmit timeout in 30s       | Language                      | Boot display                  | Enable boot password          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
08 | VFO frequency step            | Squelch level VFO A           | Squelch level VFO B           | Power save mode               |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0c | VOX sensitivity               | VOX delay                     | VFO scan type                 | DMR MIC gain                  |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
10 | PF1 short press function      | PF2 short press function      | PF3 short press function      | P1 short press function       |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
14 | P2 short press function       | Work mode A                   | Work mode B                   | STE Type                      |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
18 | STE freq. no signal           | Group call hang time in sec   | Private call hang time in sec | Prewave time in 20ms          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
1c | Wake head period in 20ms      | WFM channel index             | WFM VFO Mode enable           | Work mode MEM zone A index    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
20 | Work mode MEM zone B index    | Unused set to 0x00            | Enable recording              | DTMF duration                 |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
24 | Man down enable               | Unused set to 0x00            | Display brightness            | Backlight duration            |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
28 | Enable GPS                    | Enable SMS alert              | Unused set to 0x00            | WFM monitor enable            |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
2c | Work mode main channel set    | Enable sub channel            | TBST frquency                 | Enable call alert             |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
30 | GPS Time zone                 | Talk permit tone              | Digital call reset tone       | VOX source                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
34 | Enable pro mode               | Unused set to 0x00            | Idle channel tone             | Menu exit time                |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
38 | Filter own ID enable          | Startup tone enable           | Enable call end prompt        | Max speaker volume            |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
3c | Remote stun/kill enable       | Unused set to 0x00            | Remote monitor enable         | GPS RX positions              |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
40 | Unknown                       | PF1 long press function       | PF2 long press function       | PF3 long press function       |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
44 | P1 long press function        | P2 long press function        | Long press duration           | Enable Volume change prompt   |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
48 | Auto repeater A direction     | Digital monitor slot          | Digital monitor color code    | Digital monitor match ID      |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
4c | Digital monitor hold slot     | Display later caller          | Unknown                       | Man down delay in sec         |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
50 | Analog call hold in seconds   | Display clock                 | Max head phone volume         | Enable GPS message            |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
54 | Unknown settings                                                                              | Enable enhanced audio         |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
58 | VFO Scan UHF minimum frequency in 10Hz, 32bit uint, little endian                                                             |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
5c | VFO Scan UHF maximum frequency in 10Hz, 32bit uint, little endian                                                             |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
60 | VFO Scan VHF minimum frequency in 10Hz, 32bit uint, little endian                                                             |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
64 | VFO Scan VHF maximum frequency in 10Hz, 32bit uint, little endian                                                             |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
68 | Auto rep. 1 offset index UHF  | Auto rep. 1 offset index VHF  | Unknown                                                    ...
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
6c |                                                               | Maintain call channel         | Priority zone A index         |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
70 | Priority zone B index         | Unused set to 0x00            | Call tone frequency 1 in Hz, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
74 | Call tone frequency 2 in Hz, little endian                    | Call tone frequency 3 in Hz, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
78 | Call tone frequency 4 in Hz, little endian                    | Call tone frequency 5 in Hz, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
7c | Call tone duration 1 in ms, little endian                     | Call tone duration 2 in ms, little endian                     |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
80 | Call tone duration 3 in ms, little endian                     | Call tone duration 4 in ms, little endian                     |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
84 | Call tone duration 5 in ms, little endian                     | Idle tone frequency 1 in Hz, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
88 | Idle tone frequency 2 in Hz, little endian                    | Idle tone frequency 3 in Hz, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
8c | Idle tone frequency 4 in Hz, little endian                    | Idle tone frequency 5 in Hz, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
90 | Idle tone duration 1 in ms, little endian                     | Idle tone duration 2 in ms, little endian                     |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
94 | Idle tone duration 3 in ms, little endian                     | Idle tone duration 4 in ms, little endian                     |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
98 | Idle tone duration 5 in ms, little endian                     | Reset tone frequency 1 in Hz, little endian                   |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
9c | Reset tone frequency 2 in Hz, little endian                   | Reset tone frequency 3 in Hz, little endian                   |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
a0 | Reset tone frequency 4 in Hz, little endian                   | Reset tone frequency 5 in Hz, little endian                   |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
a4 | Reset tone duration 1 in ms, little endian                    | Reset tone duration 2 in ms, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
a8 | Reset tone duration 3 in ms, little endian                    | Reset tone duration 4 in ms, little endian                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
ac | Reset tone duration 5 in ms, little endian                    | Record delay in 200ms         | Call display mode             |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
b0 | Unknown settings              | BT enable                     | BT and internal mic           | BT and internal speaker       |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
b4 | Plug-in rec tone enable       | GPS ranging interval in sec   | BT mic gain                   | BT speaker gain               |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
b8 | Display channel number        | Display contact               | Auto roaming period in min    | Key tone level                |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
bc | Callsign color                | GPS unit                      | 0   0   0 |KLF|LSK| 0 |LKB|LKN| Auto roam delay in seconds    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
c0 | Standby text color            | Standby background image      | Show last call on boot        | SMS format                    |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
c4 | Auto repeater VHF 1 min frequency in 10Hz, 32bit uint, little endian                                                          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
c8 | Auto repeater VHF 1 max frequency in 10Hz, 32bit uint, little endian                                                          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
cc | Auto repeater UHF 1 min frequency in 10Hz, 32bit uint, little endian                                                          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
d0 | Auto repeater UHF 1 max frequency in 10Hz, 32bit uint, little endian                                                          |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
d4 | Auto rep. VFO B direction     | Addrbook is sent w own code   | Unused set to 0x00            | Boot channel enable           |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
d8 | VFO A default zone index      | VFO B default zone index      | VFO A default channel index   | VFO B default channel index   |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
dc | Default roaming zone index    | Repeater range check enable   | Repeater check interval in 5s | RepCheck reconnect count      |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
e0 | Roam start condition          | Backlight duration TX in sec  | Separate display              | Keep last caller              |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
e4 | Channel name A color          | RepCheck notification         | Backlight duration RX in sec  | Roaming enable                |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
e8 | Unused set to 0x00            | Mute delay in minutes-1       | RepCheck num notification     | Startup GPS test enable       |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
ec | Startup reset enable          | BT hold time                  | BT RX delay                   | Unknown                       |
   +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+

Field description:
  - Work mode settings:
    - Display mode: 0=Channel, 1=Frequency
    - Work mode A/B: 0=Channel, 1=VFO
    - Work mode main channel set: 0=A, 1=B
  - VOX settings:
    - VOX sensitivity: 0=Off, 1=1, ..., 3=3
    - VOX delay in 100+500*n ms
    - VOX source: 0=internal, 1=external, 2=both
  - Bluetooth settings:
    - BT mic gain: 0=1, ..., 3=4 (default), 4=5.
    - BT speaker gain: 0=1, 1=2 (default), ..., 4=5
    - BT hold time in seconds: 0=Off, ..., 10=10s (default), ..., 120=120s, 121=infinite.
    - BT RX delay in 0.5s: 0=30ms, 1=1.0s, 2=1.5s, ... 10=5.5
  - STE settings:
    - STE type: 0=Off, 1=Silent, 2=120deg, 3=180deg, 4=240deg
    - STE freq. no signal: 0=Off, 1=55.2Hz, 2=259.2Hz
  - Power save settings:
    - Automatic shutdown time: 0=Off (default), 1=10min, 2=30min, 3=60min, 4=120min
    - Power save mode: 0=Off, 1=1:1 (50%), 2=2:1 (66%)
  - Key settings:
    - Key functions:
    - Long press duration: 0=1s, 1=2s, ..., 4=5s
    - KLF: Key lock forced enable
    - LSK: Lock side key
    - LKB: Keyboard lock
    - LKN: Knob lock
  - Other settings:
    - Addrbook is sent w own code: Analog call send radio ID together with selected address book entry.
    - Transmit timeout in multiples of 30s. 0=Off, 1=30s, ..., 8=240s
    - Language: 0=English, 1=German
    - VFO frequency step: 0=2.5kHz, 1=5kHz, 2=6.25kHz, 3=8.33kHz, 4=10kHz, 5=12.5kHz, 6=20kHz, 7=25kHz
    - TBST frquency: 0=1000Hz, 1=1450Hz, 2=1750Hz, 3=2100Hz
    - Analog call hold in seconds [0,...,30s]
    - Maintain call channel: If enabled, allows to answer calls on sub-channel within 5s.
    - Priority zone A/B index: Zone index 0-based, 0xff=Off.
  - DMR settings:
    - Group/private call hang time in seconds: 0=1s, ..., 29=30s, 30=30min, 31=infinite.
    - Prewave time/wake head period in 20ms: 0=0ms, ..., 5=100ms (default), ..., 50=1000ms
    - Digital monitor slot: 0=Off, 1=Single slot, 2=Dual slot
    - SMS format: 0=Motorola, 1=Hytera, 2=DMR standard
  - Boot settings:
    - Boot display: 0=default, 1=custom text, 2=custom image
    - VFO A/B default channel index: Channel index within default zone. 0xff = VFO.
  - Tone settings:
    - Talk permit tone: 0=Off, 1=DMR, 2=FM, 3=both
    - Idle channel tone: 0=Off, 1=Type 1, 2=Type 2, 3=Type 3
    - Key tone level: 0=adjustable, 1, ..., 15
  - Display settings:
    - Display brightness: 0=1, ..., 4=5
    - Backlight duration: 0=Always, 1=5s, 2=10s, ..., 6=30s, 7=1m
    - Backlight duration TX in sec: 0=Off, 1=1s, ..., 30=30s
    - Menu exit time in 5sec: 0=5s, ..., 11=60s
    - Display later caller: 0=Off, 1=ID, 2=Call, 3=Both
    - Call display mode: 0=Off, 1=Call, 2=Name
    - Callsign/channel name/ color: 0=Orange, 1=Red, 2=Yellow, 3=Green, 4=Turquoise, 5=Blue, 6=White
    - Display channel number: 0=Channel number, 1=Index in zone
    - Standby text color: 0=White, 1=Black, 2=Orange, 3=Red, 4=Yellow, 5=Green, 6=Turquoise, 7=Blue
    - Standby background image: 0=Default, 1=Custom 1, 2=Custom 2
    - Separate display: Draws a line to separate upper and lower half of the display.
    - Keep last caller on channel switch
    - Backlight duration RX in sec: 0=Always, 1=1s, ..., 30=30s.
  - GPS settings:
    - GPS time-zone: 00h=UTC-12:00, ..., 09h=UTC-3:30, 0Ah=UTC-3:00, ..., 0Dh=UTC, ..., 11h=UTC+3:30,
                     12h=UTC+4:00, 13h=UTC+4:30, 14h=UTC+5:00, 15h=UTC+5:30, 16h=UTC+5:45, ...,
                     1Ah=UTC+8:30, ..., 1Fh=UTC+13:00
    - GPS ranging interval in sec [5,255]
    - GPS units: 0=metric, 1=imperial
  - Scan settings:
    - VFO scan type: 0=fixed time, 1=carrier, 2=stop
  - Auto repeater settings:
    - Auto repeater A/B direction: 0=Off, 1=Positive, 2=Negative
    - Auto rep. 1 offset index UHF/VHF. Offset frequency index 0-based, 0xff=Off.
    - Repeater check interval in 5s: 0=5s, ..., 9=50s
    - RepCheck reconnect count: 0=3, 1=4, 2=5
    - RepCheck notification: 0=Off, 1=Bell, 2=Voice
    - RepCheck num notification: 0=1, ..., 9=10.
    - Roam start condition: 0=time based, 1=out-of-range
    - Auto roaming period in min: 0=1min, ..., 255=256min.
    - Auto roam delay in seconds: 0=None, 1=1s, ..., 30=30min
  - Audio settings:
    - Max speaker/head phone volume: 0=Indoors, 1=1, ..., 5=5 (default), ..., 8=8
    - DMR MIC gain: 0=1 (default), ..., 4=5

Member Enumeration Documentation

◆ FreqStep

enum D878UVCodeplug::GeneralSettingsElement::FreqStep

protected

Possible VFO frequency steps.

Enumerator
FREQ_STEP_2_5kHz	2.5kHz
FREQ_STEP_5kHz	5kHz
FREQ_STEP_6_25kHz	6.25kHz
FREQ_STEP_10kHz	10kHz
FREQ_STEP_12_5kHz	12.5kHz
FREQ_STEP_20kHz	20kHz
FREQ_STEP_25kHz	25kHz
FREQ_STEP_50kHz	50kHz

Member Function Documentation

◆ defaultChannelAIndex()

unsigned D878UVCodeplug::GeneralSettingsElement::defaultChannelAIndex ( ) const

virtual

Returns the default channel index for VFO A.

Must be within default zone. If 0xff, default channel is VFO.

Reimplemented from D868UVCodeplug::GeneralSettingsElement.

◆ defaultChannelBIndex()

unsigned D878UVCodeplug::GeneralSettingsElement::defaultChannelBIndex ( ) const

virtual

Returns the default channel index for VFO B.

Must be within default zone. If 0xff, default channel is VFO.

Reimplemented from D868UVCodeplug::GeneralSettingsElement.

◆ setSTEFrequency()

void D878UVCodeplug::GeneralSettingsElement::setSTEFrequency ( double freq )

virtual

Sets the STE (squelch tail eliminate) frequency setting.

A value of 0 disables the STE. Possible values are 55.2 and 259.2 Hz.

◆ steFrequency()

double D878UVCodeplug::GeneralSettingsElement::steFrequency ( ) const

virtual

Returns the STE (squelch tail eliminate) frequency setting in Hz.

A value of 0 disables the STE. Possible values are 55.2 and 259.2 Hz.

The documentation for this class was generated from the following files:

/home/hannes/Software/qdmr/lib/d878uv_codeplug.hh
/home/hannes/Software/qdmr/lib/d878uv_codeplug.cc

Classes

Public Member Functions

Static Public Member Functions

Protected Types

Protected Member Functions

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ FreqStep

Member Function Documentation

◆ defaultChannelAIndex()

◆ defaultChannelBIndex()

◆ setSTEFrequency()

◆ steFrequency()