General settings element for the DMR-6X2UV. More...
#include <dmr6x2uv_codeplug.hh>
Inheritance diagram for DMR6X2UVCodeplug::GeneralSettingsElement:
Collaboration diagram for DMR6X2UVCodeplug::GeneralSettingsElement:
Classes | |
| struct | KeyFunction |
| Device specific encoding of the key functions. More... | |
| struct | Offset |
| Some internal used offsets within the element. More... | |
Public Member Functions | |
| GeneralSettingsElement (uint8_t *ptr) | |
| Constructor. | |
| bool | idleChannelTone () const |
Returns true if the idle channel tone is enabled. | |
| void | enableIdleChannelTone (bool enable) |
| Enables/disables the idle channel tone. | |
| virtual unsigned | transmitTimeout () const |
| Returns the transmit timeout in seconds. | |
| virtual void | setTransmitTimeout (unsigned tot) |
| Sets the transmit timeout in seconds. | |
| virtual AnytoneDisplaySettingsExtension::Language | language () const |
| Returns the UI language. | |
| virtual void | setLanguage (AnytoneDisplaySettingsExtension::Language lang) |
| Sets the UI language. | |
| virtual Frequency | vfoFrequencyStep () const |
| Returns the VFO frequency step in kHz. | |
| virtual void | setVFOFrequencyStep (Frequency kHz) |
| Sets the VFO frequency step in kHz. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKeyAShort () const |
| Returns the key function for a short press on the function key 1/A. | |
| void | setFuncKeyAShort (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a short press on the function key 1/A. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKeyBShort () const |
| Returns the key function for a short press on the function key 2/B. | |
| void | setFuncKeyBShort (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a short press on the function key 2/B. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKeyCShort () const |
| Returns the key function for a short press on the function key 3/C. | |
| void | setFuncKeyCShort (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a short press on the function key 3/C. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKey1Short () const |
| Returns the key function for a short press on the function key 1. | |
| void | setFuncKey1Short (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a short press on the function key 1. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKey2Short () const |
| Returns the key function for a short press on the function key 2. | |
| void | setFuncKey2Short (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a short press on the function key 2. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKeyALong () const |
| Returns the key function for a long press on the function key 1. | |
| void | setFuncKeyALong (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a long press on the function key 1. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKeyBLong () const |
| Returns the key function for a long press on the function key 2. | |
| void | setFuncKeyBLong (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a long press on the function key 2. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKeyCLong () const |
| Returns the key function for a long press on the function key 3. | |
| void | setFuncKeyCLong (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a long press on the function key 3. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKey1Long () const |
| Returns the key function for a long press on the function key 1. | |
| void | setFuncKey1Long (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a long press on the function key 1. | |
| AnytoneKeySettingsExtension::KeyFunction | funcKey2Long () const |
| Returns the key function for a long press on the function key 2. | |
| void | setFuncKey2Long (AnytoneKeySettingsExtension::KeyFunction func) |
| Sets the key function for a long press on the function key 2. | |
| bool | vfoModeA () const |
Returns true if the VFO A is in VFO mode. | |
| void | enableVFOModeA (bool enable) |
| Enables/disables VFO mode for VFO A. | |
| bool | vfoModeB () const |
Returns true if the VFO B is in VFO mode. | |
| void | enableVFOModeB (bool enable) |
| Enables/disables VFO mode for VFO B. | |
| virtual AnytoneSettingsExtension::STEType | steType () const |
| Returns the STE (squelch tail eliminate) type. | |
| virtual void | setSTEType (AnytoneSettingsExtension::STEType type) |
| Sets the STE (squelch tail eliminate) type. | |
| virtual double | steFrequency () const |
| Returns the STE (squelch tail eliminate) frequency setting in Hz. More... | |
| virtual void | setSTEFrequency (double freq) |
| Sets the STE (squelch tail eliminate) frequency setting. More... | |
| virtual Interval | groupCallHangTime () const |
| Returns the group call hang time in seconds. | |
| virtual void | setGroupCallHangTime (Interval sec) |
| Sets the group call hang time in seconds. | |
| virtual Interval | privateCallHangTime () const |
| Returns the private call hang time in seconds. | |
| virtual void | setPrivateCallHangTime (Interval sec) |
| Sets the private call hang time in seconds. | |
| virtual Interval | preWaveDelay () const |
| Returns the pre-wave time in ms. | |
| virtual void | setPreWaveDelay (Interval ms) |
| Sets the pre-wave time in ms. | |
| virtual Interval | wakeHeadPeriod () const |
| Returns the wake head-period in ms. | |
| virtual void | setWakeHeadPeriod (Interval ms) |
| Sets the wake head-period in ms. | |
| virtual unsigned | wfmChannelIndex () const |
| Returns the wide-FM (broadcast) channel index. | |
| virtual void | setWFMChannelIndex (unsigned idx) |
| Sets the wide-FM (broadcast) channel index. | |
| virtual bool | wfmVFOEnabled () const |
Returns true if the WFM RX is in VFO mode. | |
| virtual void | enableWFMVFO (bool enable) |
| Enables/disables VFO mode for WFM RX. | |
| virtual unsigned | dtmfToneDuration () const |
| Returns the DTMF tone duration in ms. | |
| virtual void | setDTMFToneDuration (unsigned ms) |
| Sets the DTMF tone duration in ms. | |
| virtual bool | manDown () const |
Returns true if "man down" is enabled. | |
| virtual void | enableManDown (bool enable) |
| Enables/disables "man down". | |
| virtual bool | wfmMonitor () const |
Returns true if WFM monitor is enabled. | |
| virtual void | enableWFMMonitor (bool enable) |
| Enables/disables WFM monitor. | |
| virtual Frequency | tbstFrequency () const |
| Returns the TBST frequency. | |
| virtual void | setTBSTFrequency (Frequency freq) |
| Sets the TBST frequency. | |
| virtual bool | proMode () const |
Returns true if the "pro mode" is enabled. | |
| virtual void | enableProMode (bool enable) |
| Enables/disables the "pro mode". | |
| bool | keyToneEnabled () const |
Returns true, if the key tone is enabled. | |
| void | enableKeyTone (bool enable) |
| Enables/disables the key-tone. | |
| virtual bool | filterOwnID () const |
Returns true if the own ID is filtered in call lists. | |
| virtual void | enableFilterOwnID (bool enable) |
| Enables/disables filter of own ID in call lists. | |
| virtual bool | remoteStunKill () const |
Returns true remote stun/kill is enabled. | |
| virtual void | enableRemoteStunKill (bool enable) |
| Enables/disables remote stun/kill. | |
| virtual bool | remoteMonitor () const |
Returns true remote monitor is enabled. | |
| virtual void | enableRemoteMonitor (bool enable) |
| Enables/disables remote monitor. | |
| virtual bool | selectTXContactEnabled () const |
Returns true, if the selection of a TX contact is enabled. | |
| virtual void | enableSelectTXContact (bool enable) |
| Enables/disables selection of the TX contact. | |
| virtual AnytoneDMRSettingsExtension::SlotMatch | monitorSlotMatch () const |
| Returns the monitor slot match. | |
| virtual void | setMonitorSlotMatch (AnytoneDMRSettingsExtension::SlotMatch match) |
| Sets the monitor slot match. | |
| virtual bool | monitorColorCodeMatch () const |
Returns true if the monitor matches color code. | |
| virtual void | enableMonitorColorCodeMatch (bool enable) |
| Enables/disables monitor color code match. | |
| virtual bool | monitorIDMatch () const |
Returns true if the monitor matches ID. | |
| virtual void | enableMonitorIDMatch (bool enable) |
| Enables/disables monitor ID match. | |
| virtual bool | monitorTimeSlotHold () const |
Returns true if the monitor holds the time slot. | |
| virtual void | enableMonitorTimeSlotHold (bool enable) |
| Enables/disables monitor time slot hold. | |
| virtual Interval | manDownDelay () const |
| Returns the "man down" delay in seconds. | |
| virtual void | setManDownDelay (Interval sec) |
| Sets the "man down" delay in seconds. | |
| virtual unsigned | fmCallHold () const |
| Returns the analog call hold in seconds. | |
| virtual void | setFMCallHold (unsigned sec) |
| Sets the analog call hold in seconds. | |
| virtual bool | gpsMessageEnabled () const |
Returns true if the GPS range reporting is enabled. | |
| virtual void | enableGPSMessage (bool enable) |
| Enables/disables GPS range reporting. | |
| virtual bool | maintainCallChannel () const |
Returns true if the call channel is maintained. | |
| virtual void | enableMaintainCallChannel (bool enable) |
| Enables/disables maintaining the call channel. | |
| virtual unsigned | priorityZoneAIndex () const |
| Returns the priority Zone A index. | |
| virtual void | setPriorityZoneAIndex (unsigned idx) |
| Sets the priority zone A index. | |
| virtual unsigned | priorityZoneBIndex () const |
| Returns the priority Zone B index. | |
| virtual void | setPriorityZoneBIndex (unsigned idx) |
| Sets the priority zone B index. | |
| virtual bool | smsConfirmEnabled () const |
Returns true, if a SMS confirmation is sent. | |
| virtual void | enableSMSConfirm (bool enable) |
| Enables/disables SMS confirmation. | |
| virtual bool | simplexRepeaterEnabled () const |
Returns true if the simplex repeater feature is enabled. | |
| virtual void | enableSimplexRepeater (bool enable) |
| Enables disables the simplex repeater feature. | |
| Interval | gpsUpdatePeriod () const |
| Returns the GPS update period in seconds. | |
| void | setGPSUpdatePeriod (Interval sec) |
| Sets the GPS update period in seconds. | |
| virtual bool | monitorSimplexRepeaterEnabled () const |
Returns true if the speaker is switched on during RX in simplex repeater mode, see simplexRepeaterEnabled. | |
| virtual void | enableMonitorSimplexRepeater (bool enable) |
| Enables/disables the speaker during RX in simplex repeater mode. | |
| bool | showCurrentContact () const |
Returns true if the current contact is shown. | |
| void | enableShowCurrentContact (bool enable) |
| Enables/disables display of current contact. | |
| bool | keyToneLevelAdjustable () const |
Returns true if the key-tone level is adjustable. | |
| unsigned | keyToneLevel () const |
| Returns the key-tone level (0=adjustable). | |
| void | setKeyToneLevel (unsigned level) |
| Sets the key-tone level. | |
| void | setKeyToneLevelAdjustable () |
| Sets the key-tone level adjustable. | |
| bool | knobLock () const |
Returns true if the knob is locked. | |
| void | enableKnobLock (bool enable) |
| Enables/disables the knob lock. | |
| bool | keypadLock () const |
Returns true if the keypad is locked. | |
| void | enableKeypadLock (bool enable) |
| Enables/disables the keypad lock. | |
| bool | sidekeysLock () const |
Returns true if the sidekeys are locked. | |
| void | enableSidekeysLock (bool enable) |
| Enables/disables the sidekeys lock. | |
| bool | keyLockForced () const |
Returns true if the "professional" key is locked. | |
| void | enableKeyLockForced (bool enable) |
| Enables/disables the "professional" key lock. | |
| virtual AnytoneSimplexRepeaterSettingsExtension::TimeSlot | simplexRepeaterTimeslot () const |
| Returns the time-slot in simplex repeater mode. | |
| virtual void | setSimplexRepeaterTimeslot (AnytoneSimplexRepeaterSettingsExtension::TimeSlot slot) |
| Sets the time-slot in simplex repeater mode. | |
| bool | showLastHeard () const |
Returns true if the last heard is shown while pressing PTT. | |
| void | enableShowLastHeard (bool enable) |
| Enables/disables showing last heard. | |
| virtual AnytoneDMRSettingsExtension::SMSFormat | smsFormat () const |
| Returns the SMS format. | |
| virtual void | setSMSFormat (AnytoneDMRSettingsExtension::SMSFormat fmt) |
| Sets the SMS format. | |
| bool | gpsUnitsImperial () const |
Returns true if the GPS units are imperial. | |
| void | enableGPSUnitsImperial (bool enable) |
| Enables/disables imperial GPS units. | |
| Frequency | autoRepeaterMinFrequencyVHF () const |
| Returns the minimum frequency in Hz for the auto-repeater range in VHF band. | |
| void | setAutoRepeaterMinFrequencyVHF (Frequency Hz) |
| Sets the minimum frequency in Hz for the auto-repeater range in VHF band. | |
| Frequency | autoRepeaterMaxFrequencyVHF () const |
| Returns the maximum frequency in Hz for the auto-repeater range in VHF band. | |
| void | setAutoRepeaterMaxFrequencyVHF (Frequency Hz) |
| Sets the maximum frequency in Hz for the auto-repeater range in VHF band. | |
| Frequency | autoRepeaterMinFrequencyUHF () const |
| Returns the minimum frequency in Hz for the auto-repeater range in UHF band. | |
| void | setAutoRepeaterMinFrequencyUHF (Frequency Hz) |
| Sets the minimum frequency in Hz for the auto-repeater range in UHF band. | |
| Frequency | autoRepeaterMaxFrequencyUHF () const |
| Returns the maximum frequency in Hz for the auto-repeater range in UHF band. | |
| void | setAutoRepeaterMaxFrequencyUHF (Frequency Hz) |
| Sets the maximum frequency in Hz for the auto-repeater range in UHF band. | |
| AnytoneAutoRepeaterSettingsExtension::Direction | autoRepeaterDirectionB () const |
| Returns the auto-repeater direction for VFO B. | |
| void | setAutoRepeaterDirectionB (AnytoneAutoRepeaterSettingsExtension::Direction dir) |
| Sets the auto-repeater direction for VFO B. | |
| virtual bool | fmSendIDAndContact () const |
| If enabled, the FM ID is sent together with selected contact. | |
| virtual void | enableFMSendIDAndContact (bool enable) |
| Enables/disables sending contact with FM ID. | |
| bool | defaultChannel () const |
Returns true if the default boot channel is enabled. | |
| void | enableDefaultChannel (bool enable) |
| Enables/disables default boot channel. | |
| unsigned | defaultZoneIndexA () const |
| Returns the default zone index (0-based) for VFO A. | |
| void | setDefaultZoneIndexA (unsigned idx) |
| Sets the default zone (0-based) for VFO A. | |
| unsigned | defaultZoneIndexB () const |
| Returns the default zone index (0-based) for VFO B. | |
| void | setDefaultZoneIndexB (unsigned idx) |
| Sets the default zone (0-based) for VFO B. | |
| bool | defaultChannelAIsVFO () const |
Returns true if the default channel for VFO A is VFO. | |
| unsigned | defaultChannelAIndex () const |
| Returns the default channel index for VFO A. More... | |
| void | setDefaultChannelAIndex (unsigned idx) |
| Sets the default channel index for VFO A. | |
| void | setDefaultChannelAToVFO () |
| Sets the default channel for VFO A to be VFO. | |
| bool | defaultChannelBIsVFO () const |
Returns true if the default channel for VFO B is VFO. | |
| unsigned | defaultChannelBIndex () const |
| Returns the default channel index for VFO B. More... | |
| void | setDefaultChannelBIndex (unsigned idx) |
| Sets the default channel index for VFO B. | |
| void | setDefaultChannelBToVFO () |
| Sets the default channel for VFO B to be VFO. | |
| bool | keepLastCaller () const |
Returns true if the last caller is kept when changing channel. | |
| void | enableKeepLastCaller (bool enable) |
| Enables/disables keeping the last caller when changing the channel. | |
| Interval | rxBacklightDuration () const |
| Returns the backlight duration in seconds. | |
| void | setRXBacklightDuration (Interval sec) |
| Sets the backlight duration in seconds. | |
| virtual AnytoneDisplaySettingsExtension::Color | standbyBackgroundColor () const |
| Returns the stand-by background color. | |
| virtual void | setStandbyBackgroundColor (AnytoneDisplaySettingsExtension::Color color) |
| Sets the stand-by background color. | |
| virtual unsigned int | manualDialedGroupCallHangTime () const |
| Returns the group-call hang time, if group call was dialed manually. | |
| virtual void | setManualDialedGroupCallHangTime (unsigned int dur) |
| Sets the group-call hang time, if the group call was dialed maually. | |
| virtual unsigned int | manualDialedPrivateCallHangTime () const |
| Returns the private-call hang time, if private call was dialed manually. | |
| virtual void | setManualDialedPrivateCallHangTime (unsigned int dur) |
| Sets the private-call hang time, if the private call was dialed maually. | |
| bool | fromConfig (const Flags &flags, Context &ctx) |
| Encodes the general settings. | |
| bool | updateConfig (Context &ctx) |
| Updates the abstract config from general settings. | |
 Public Member Functions inherited from D868UVCodeplug::GeneralSettingsElement | |
| GeneralSettingsElement (uint8_t *ptr) | |
| Constructor. | |
| void | clear () |
| Resets the general settings. | |
| virtual AnytonePowerSaveSettingsExtension::PowerSave | powerSave () const |
| Returns the power-save mode. | |
| virtual void | setPowerSave (AnytonePowerSaveSettingsExtension::PowerSave mode) |
| Sets the power-save mode. | |
| virtual unsigned | voxLevel () const |
| Returns the VOX level. | |
| virtual void | setVOXLevel (unsigned level) |
| Sets the VOX level. | |
| virtual Interval | voxDelay () const |
| Returns the VOX delay in ms. | |
| virtual void | setVOXDelay (Interval ms) |
| Sets the VOX delay in ms. | |
| virtual AnytoneAudioSettingsExtension::VoxSource | voxSource () const |
| Returns the VOX source. | |
| virtual void | setVOXSource (AnytoneAudioSettingsExtension::VoxSource source) |
| Sets the VOX source. | |
| unsigned int | dmrMicGain () const |
| Returns the mirophone gain. | |
| void | setDMRMicGain (unsigned int gain) |
| Sets the microphone gain. | |
| unsigned | maxSpeakerVolume () const |
| Returns the maximum volume. | |
| void | setMaxSpeakerVolume (unsigned level) |
| Sets the maximum volume. | |
| virtual unsigned | maxHeadPhoneVolume () const |
| Returns the maximum headphone volume. | |
| virtual void | setMaxHeadPhoneVolume (unsigned max) |
| Sets the maximum headphone volume. | |
| bool | enhanceAudio () const |
Returns true if the audio is "enhanced". | |
| void | enableEnhancedAudio (bool enable) |
| Enables/disables "enhanced" audio. | |
| bool | recording () const |
Returns true if recording is enabled. | |
| void | enableRecording (bool enable) |
| Enables/disables recording. | |
| virtual unsigned | recordingDelay () const |
| Returns the recording delay in ms. | |
| virtual void | setRecodringDelay (unsigned ms) |
| Sets the recording delay in ms. | |
| AnytoneSettingsExtension::VFOScanType | vfoScanType () const |
| Returns the VFO scan type. | |
| void | setVFOScanType (AnytoneSettingsExtension::VFOScanType type) |
| Sets the VFO scan type. | |
| Frequency | minVFOScanFrequencyUHF () const |
| Returns the minimum VFO scan frequency for the UHF band in Hz. | |
| void | setMinVFOScanFrequencyUHF (Frequency hz) |
| Sets the minimum VFO scan frequency for the UHF band in Hz. | |
| Frequency | maxVFOScanFrequencyUHF () const |
| Returns the maximum VFO scan frequency for the UHF band in Hz. | |
| void | setMaxVFOScanFrequencyUHF (Frequency hz) |
| Sets the maximum VFO scan frequency for the UHF band in Hz. | |
| Frequency | minVFOScanFrequencyVHF () const |
| Returns the minimum VFO scan frequency for the VHF band in Hz. | |
| void | setMinVFOScanFrequencyVHF (Frequency hz) |
| Sets the minimum VFO scan frequency for the VHF band in Hz. | |
| Frequency | maxVFOScanFrequencyVHF () const |
| Returns the maximum VFO scan frequency for the VHF band in Hz. | |
| void | setMaxVFOScanFrequencyVHF (Frequency hz) |
| Sets the maximum VFO scan frequency for the VHF band in Hz. | |
| Interval | longPressDuration () const |
| Returns the long-press duration in ms. | |
| void | setLongPressDuration (Interval ms) |
| Sets the long-press duration in ms. | |
| unsigned | memoryZoneA () const |
| Returns the memory zone for VFO A. | |
| void | setMemoryZoneA (unsigned zone) |
| Sets the memory zone for VFO A. | |
| unsigned | memoryZoneB () const |
| Returns the memory zone for VFO B. | |
| void | setMemoryZoneB (unsigned zone) |
| Sets the memory zone for VFO B. | |
| bool | gps () const |
Returns true if GPS is enabled. | |
| void | enableGPS (bool enable) |
| Enables/disables recording. | |
| QTimeZone | gpsTimeZone () const |
| Returns the GPS time zone. | |
| void | setGPSTimeZone (const QTimeZone &zone) |
| Sets the GPS time zone. | |
| bool | getGPSPosition () const |
Returns true if get GPS position is enabled. | |
| void | enableGetGPSPosition (bool enable) |
| Enables/disables get GPS position. | |
| bool | smsAlert () const |
Returns true if SMS alert is enabled. | |
| void | enableSMSAlert (bool enable) |
| Enables/disables SMS alert. | |
| bool | callAlert () const |
Returns true if call alert is enabled. | |
| void | enableCallAlert (bool enable) |
| Enables/disables call alert. | |
| bool | dmrTalkPermit () const |
Returns true if the talk permit tone is enabled for digital channels. | |
| void | enableDMRTalkPermit (bool enable) |
| Enables/disables the talk permit tone for digital channels. | |
| bool | fmTalkPermit () const |
Returns true if the talk permit tone is enabled for digital channels. | |
| void | enableFMTalkPermit (bool enable) |
| Enables/disables the talk permit tone for analog channels. | |
| bool | dmrResetTone () const |
Returns true if the reset tone is enabled for digital calls. | |
| void | enableDMRResetTone (bool enable) |
| Enables/disables the reset tone for digital calls. | |
| bool | startupTone () const |
Returns true if the startup tone is enabled. | |
| void | enableStartupTone (bool enable) |
| Enables/disables the startup tone. | |
| void | callToneMelody (Melody &melody) const |
| Returns the call-tone melody. | |
| void | setCallToneMelody (const Melody &melody) |
| Sets the call-tone melody. | |
| void | idleToneMelody (Melody &melody) const |
| Returns the idle-tone melody. | |
| void | setIdleToneMelody (const Melody &melody) |
| Sets the idle-tone melody. | |
| void | resetToneMelody (Melody &melody) const |
| Returns the reset-tone melody. | |
| void | setResetToneMelody (const Melody &melody) |
| Sets the reset-tone melody. | |
| bool | activeChannelB () const |
Returns true if the active channel is VFO B. | |
| void | enableActiveChannelB (bool enable) |
| Enables/disables VFO B as the active channel. | |
| bool | subChannel () const |
Returns true if sub channel is enabled. | |
| void | enableSubChannel (bool enable) |
| Enables/disables sub channel. | |
| Interval | menuExitTime () const |
| Returns the menu exit time in seconds. | |
| void | setMenuExitTime (Interval intv) |
| Sets the menu exit time in seconds. | |
| bool | callEndPrompt () const |
Returns true if the call-end prompt is enabled. | |
| void | enableCallEndPrompt (bool enable) |
| Enables/disables the call-end prompt. | |
| bool | volumeChangePrompt () const |
Returns true if the volume change prompt is enabled. | |
| void | enableVolumeChangePrompt (bool enable) |
| Enables/disables the volume change prompt. | |
| AnytoneDisplaySettingsExtension::LastCallerDisplayMode | lastCallerDisplayMode () const |
| Returns the last-caller display mode. | |
| void | setLastCallerDisplayMode (AnytoneDisplaySettingsExtension::LastCallerDisplayMode mode) |
| Sets the last-caller display mode. | |
| bool | displayClock () const |
Returns true if the clock is shown. | |
| void | enableDisplayClock (bool enable) |
| Enables/disables clock display. | |
| bool | displayCall () const |
Returns true if the call is displayed instead of the name. | |
| void | enableDisplayCall (bool enable) |
| Enables/disables call display. | |
| AnytoneDisplaySettingsExtension::Color | callDisplayColor () const |
| Returns the display color for callsigns. | |
| void | setCallDisplayColor (AnytoneDisplaySettingsExtension::Color color) |
| Sets the display color for callsigns. | |
| unsigned | brightness () const |
| Returns the display brightness. | |
| void | setBrightness (unsigned level) |
| Sets the display brightness. | |
| virtual bool | backlightPermanent () const |
Returns true if the backlight is always on. | |
| virtual void | enableBacklightPermanent () |
| Sets the backlight to permanent (always on). | |
| AnytoneAutoRepeaterSettingsExtension::Direction | autoRepeaterDirectionA () const |
| Returns the auto repeater offset direction for VFO A. | |
| void | setAutoRepeaterDirectionA (AnytoneAutoRepeaterSettingsExtension::Direction dir) |
| Sets the auto-repeater offset direction for VFO A. | |
| bool | hasAutoRepeaterOffsetFrequencyIndexUHF () const |
Returns true if the auto-repeater offset frequency for UHF is set. | |
| unsigned | autoRepeaterOffsetFrequencyIndexUHF () const |
| Returns the auto-repeater offset frequency index for UHF. | |
| void | setAutoRepeaterOffsetFrequenyIndexUHF (unsigned idx) |
| Sets the auto-repeater offset frequency index for UHF. | |
| void | clearAutoRepeaterOffsetFrequencyIndexUHF () |
| Clears the auto-repeater offset frequency index for UHF. | |
| bool | hasAutoRepeaterOffsetFrequencyIndexVHF () const |
Returns true if the auto-repeater offset frequency for VHF is set. | |
| unsigned | autoRepeaterOffsetFrequencyIndexVHF () const |
| Returns the auto-repeater offset frequency index for UHF. | |
| void | setAutoRepeaterOffsetFrequenyIndexVHF (unsigned idx) |
| Sets the auto-repeater offset frequency index for VHF. | |
| void | clearAutoRepeaterOffsetFrequencyIndexVHF () |
| Clears the auto-repeater offset frequency index for VHF. | |
| bool | linkSettings (RadioSettings *settings, Context &ctx, const ErrorStack &err=ErrorStack()) |
| Links the general settings. | |
| Public Member Functions inherited from AnytoneCodeplug::GeneralSettingsElement | |
| virtual bool | displayFrequency () const |
Returns true if the radio displays frequecies instead of channels is enabled. | |
| virtual void | enableDisplayFrequency (bool enable) |
| Enables/disables the frequency display. | |
| virtual bool | autoKeyLock () const |
Returns true if auto key-lock is enabled. | |
| virtual void | enableAutoKeyLock (bool enable) |
| Enables/disables auto key-lock. | |
| virtual Interval | autoShutdownDelay () const |
| Returns the auto-shutdown delay in minutes. | |
| virtual void | setAutoShutdownDelay (Interval min) |
| Sets the auto-shutdown delay in minutes. | |
| virtual AnytoneBootSettingsExtension::BootDisplay | bootDisplay () const |
| Returns the boot display mode. | |
| virtual void | setBootDisplay (AnytoneBootSettingsExtension::BootDisplay mode) |
| Sets the boot display mode. | |
| virtual bool | bootPassword () const |
Returns true if boot password is enabled. | |
| virtual void | enableBootPassword (bool enable) |
| Enables/disables boot password. | |
| virtual unsigned | squelchLevelA () const |
| Squelch level of VFO A, (0=off). | |
| virtual void | setSquelchLevelA (unsigned level) |
| Returns the squelch level for VFO A, (0=off). | |
| virtual unsigned | squelchLevelB () const |
| Squelch level of VFO B, (0=off). | |
| virtual void | setSquelchLevelB (unsigned level) |
| Returns the squelch level for VFO B, (0=off). | |
| Public Member Functions inherited from Codeplug::Element | |
| Element (const Element &other) | |
| Copy constructor. | |
| virtual | ~Element () |
| Destructor. | |
| Element & | operator= (const Element &other) |
| Copy assignment. | |
| virtual bool | isValid () const |
Returns true if the pointer is not null. | |
| bool | fill (uint8_t value, unsigned offset=0, int size=-1) |
| Fills the memsets the entire element to the given value. | |
| bool | getBit (const Offset::BitOffset &offset) const |
| Reads a specific bit at the given byte-offset. | |
| bool | getBit (unsigned offset, unsigned bit) const |
| Reads a specific bit at the given byte-offset. | |
| void | setBit (const Offset::BitOffset &offset, bool value=true) |
| Sets a specific bit at the given byte-offset. | |
| void | setBit (unsigned offset, unsigned bit, bool value=true) |
| Sets a specific bit at the given byte-offset. | |
| void | clearBit (unsigned offset, unsigned bit) |
| Clears a specific bit at the given byte-offset. | |
| uint8_t | getUInt2 (unsigned offset, unsigned bit) const |
| Reads a 2bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt2 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 2bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt3 (unsigned offset, unsigned bit) const |
| Reads a 3bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt3 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 3bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt4 (unsigned offset, unsigned bit) const |
| Reads a 4bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt4 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 4bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt5 (unsigned offset, unsigned bit) const |
| Reads a 5bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt5 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 5bit iunsinged nteger at the given byte- and bit-offset. | |
| uint8_t | getUInt6 (unsigned offset, unsigned bit) const |
| Reads a 6bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt6 (unsigned offset, unsigned bit, uint8_t value) |
| Stores a 6bit unsigned integer at the given byte- and bit-offset. | |
| uint8_t | getUInt8 (unsigned offset) const |
| Reads a 8bit unsigned integer at the given byte- and bit-offset. | |
| void | setUInt8 (unsigned offset, uint8_t value) |
| Reads a 8bit unsigned integer at the given byte- and bit-offset. | |
| int8_t | getInt8 (unsigned offset) const |
| Reads a 8bit signed integer at the given byte- and bit-offset. | |
| void | setInt8 (unsigned offset, int8_t value) |
| Reads a 8bit signed integer at the given byte- and bit-offset. | |
| uint16_t | getUInt16_be (unsigned offset) const |
| Reads a 16bit big-endian unsigned integer at the given byte-offset. | |
| uint16_t | getUInt16_le (unsigned offset) const |
| Reads a 16bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt16_be (unsigned offset, uint16_t value) |
| Stores a 16bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt16_le (unsigned offset, uint16_t value) |
| Stores a 16bit little-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt24_be (unsigned offset) const |
| Reads a 24bit big-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt24_le (unsigned offset) const |
| Reads a 24bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt24_be (unsigned offset, uint32_t value) |
| Stores a 24bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt24_le (unsigned offset, uint32_t value) |
| Stores a 24bit little-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt32_be (unsigned offset) const |
| Reads a 32bit big-endian unsigned integer at the given byte-offset. | |
| uint32_t | getUInt32_le (unsigned offset) const |
| Reads a 32bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt32_be (unsigned offset, uint32_t value) |
| Stores a 32bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt32_le (unsigned offset, uint32_t value) |
| Stores a 32bit little-endian unsigned integer at the given byte-offset. | |
| uint64_t | getUInt64_be (unsigned offset) const |
| Reads a 64bit big-endian unsigned integer at the given byte-offset. | |
| uint64_t | getUInt64_le (unsigned offset) const |
| Reads a 64bit little-endian unsigned integer at the given byte-offset. | |
| void | setUInt64_be (unsigned offset, uint64_t value) |
| Stores a 64bit big-endian unsigned integer at the given byte-offset. | |
| void | setUInt64_le (unsigned offset, uint64_t value) |
| Stores a 64bit little-endian unsigned integer at the given byte-offset. | |
| uint8_t | getBCD2 (unsigned offset) const |
| Reads a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset. | |
| void | setBCD2 (unsigned offset, uint8_t value) |
| Stores a 2-digit (1-byte/8bit) BDC value in big-endian at the given byte-offset. | |
| uint16_t | getBCD4_be (unsigned offset) const |
| Reads a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset. | |
| void | setBCD4_be (unsigned offset, uint16_t value) |
| Stores a 4-digit (2-byte/16bit) BDC value in big-endian at the given byte-offset. | |
| uint16_t | getBCD4_le (unsigned offset) const |
| Reads a 4-digit (2-byte/16bit) BDC value in little-endian at the given byte-offset. | |
| void | setBCD4_le (unsigned offset, uint16_t value) |
| Stores a 4-digit (1-byte/16bit) BDC value in little-endian at the given byte-offset. | |
| uint32_t | getBCD8_be (unsigned offset) const |
| Reads a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset. | |
| void | setBCD8_be (unsigned offset, uint32_t value) |
| Stores a 8-digit (4-byte/32bit) BDC value in big-endian at the given byte-offset. | |
| uint32_t | getBCD8_le (unsigned offset) const |
| Reads a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset. | |
| void | setBCD8_le (unsigned offset, uint32_t value) |
| Stores a 8-digit (4-byte/32bit) BDC value in little-endian at the given byte-offset. | |
| QString | readASCII (unsigned offset, unsigned maxlen, uint8_t eos=0x00) const |
Reads up to maxlen ASCII chars at the given byte-offset using eos as the string termination char. | |
| void | writeASCII (unsigned offset, const QString &txt, unsigned maxlen, uint8_t eos=0x00) |
Stores up to maxlen ASCII chars at the given byte-offset using eos as the string termination char. More... | |
| QString | readUnicode (unsigned offset, unsigned maxlen, uint16_t eos=0x0000) const |
Reads up to maxlen unicode chars at the given byte-offset using eos as the string termination char. | |
| void | writeUnicode (unsigned offset, const QString &txt, unsigned maxlen, uint16_t eos=0x0000) |
Stores up to maxlen unicode chars at the given byte-offset using eos as the string termination char. More... | |
Static Public Member Functions | |
| static constexpr unsigned int | size () |
| Returns the size of the element. | |
| Static Public Member Functions inherited from D868UVCodeplug::GeneralSettingsElement | |
| static constexpr unsigned int | size () |
| Returns the size of the element. | |
Protected Types | |
| enum | FreqStep { FREQ_STEP_2_5kHz = 0 , FREQ_STEP_5kHz = 1 , FREQ_STEP_6_25kHz = 2 , FREQ_STEP_10kHz = 3 , FREQ_STEP_12_5kHz = 4 , FREQ_STEP_20kHz = 5 , FREQ_STEP_25kHz = 6 , FREQ_STEP_50kHz = 7 } |
| Possible VFO frequency steps. More... | |
| enum | DTMFDuration { DTMF_DUR_50ms = 0 , DTMF_DUR_100ms = 1 , DTMF_DUR_200ms = 2 , DTMF_DUR_300ms = 3 , DTMF_DUR_500ms = 4 } |
| DTMF signalling durations. | |
| enum class | TBSTFrequency { Hz1000 = 0 , Hz1450 = 1 , Hz1750 = 2 , Hz2100 = 3 } |
| TBST (open repeater) frequencies. | |
| enum class | STEFrequency { Off = 0 , Hz55_2 = 1 , Hz259_2 = 2 } |
| All possible STE (squelch tail eliminate) frequencies. | |
Protected Member Functions | |
| GeneralSettingsElement (uint8_t *ptr, unsigned size) | |
| Hidden Constructor. | |
| Protected Member Functions inherited from D868UVCodeplug::GeneralSettingsElement | |
| GeneralSettingsElement (uint8_t *ptr, unsigned size) | |
| Hidden constructor. | |
| Protected Member Functions inherited from AnytoneCodeplug::GeneralSettingsElement | |
| GeneralSettingsElement (uint8_t *ptr, unsigned size) | |
| Hidden constructor. | |
| Protected Member Functions inherited from Codeplug::Element | |
| Element (uint8_t *ptr, size_t size) | |
| Hidden constructor. More... | |
Additional Inherited Members | |
| Public Types inherited from AnytoneCodeplug::GeneralSettingsElement | |
| enum class | AutoShutdown { Off = 0 , After10min = 1 , After30min = 2 , After60min = 3 , After120min = 4 } |
| Possible automatic shutdown delays. | |
| Protected Attributes inherited from Codeplug::Element | |
| uint8_t * | _data |
| Holds the pointer to the element. | |
| size_t | _size |
| Holds the size of the element. | |
Detailed Description
General settings element for the DMR-6X2UV.
Extends the AnytoneCodeplug::GeneralSettingsElement by the device specific settings for the BTECH DMR-6X2UV.
Memory representation of the encoded settings element (size 0x0e0 bytes):
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
00 | Idle channel tone | Display mode | Enable automatic key lock | Automatic shutdown time |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
04 | Transmit timeout in 30s | Language | Boot display | Enable boot password |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
08 | VFO frequency step | Squelch level VFO A | Squelch level VFO B | Power save mode |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
0c | VOX sensitivity | VOX delay in 100+500*n ms | VFO scan type | MIC gain |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
10 | PF1 short press function | PF2 short press function | PF3 short press function | P1 short press function |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
14 | P2 short press function | Work mode B | Work mode A | STE Type |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
18 | STE freq. no signal | Group call hang time in sec | Private call hang time in sec | Prewave time in 20ms |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
1c | Wake head period in 20ms | WFM channel index | WFM VFO Mode enable | Work mode MEM zone A idx |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
20 | Work mode MEM zone B | Unused set to 0x00 | Enable recording | DTMF duration |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
24 | Man down enable | Unused set to 0x00 | Display brightness | Backlight duration |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
28 | Enable GPS | Enable SMS alert | Unused set to 0x00 | WFM monitor enable |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
2c | Work mode main channel | Enable sub channel | TBST frquency | Enable call alert |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
30 | GPS Time zone | Talk permit tone | Digital call reset tone | VOX source |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
34 | Enable pro mode | Unused set to 0x00 | Enable key tone | Menu exit time |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
38 | Filter own ID enable | Startup tone | Enable call end prompt | Max speaker volume |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
3c | Remote stun/kill enable | Unused set to 0x00 | Remote monitor enable | GPS RX positions |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
40 | Enable select TX contact | PF1 long press function | PF2 long press function | PF3 long press function |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
44 | P1 long press function | P2 long press function | Long press duration | Enable Volume change prompt |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
48 | Auto repeater A direction | Digital monitor slot | Digital monitor color code | Digital monitor match ID |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
4c | Digital monitor hold slot | Display last caller | Unknown | Man down delay in sec |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
50 | Analog call hold in seconds | Enable display clock | Max headphone volume | Enable GPS range message |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
54 | Unknown settings | Enable enhanced audio |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
58 | VFO Scan UHF minimum frequency in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
5c | VFO Scan UHF maximum frequency in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
60 | VFO Scan VHF minimum frequency in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
64 | VFO Scan VHF maximum frequency in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
68 | Autorep. off. idx UHF, ffh=off| Autorep. off. idx VHF, ffh=off| Unknown ...
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
6c ... | Enable maintain call channel | Priority zone A idx, 0xff=off |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
70 | Priority zone B idx, 0xff=off | Enable SMS confirmation | Call tone frequency 1 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
74 | Call tone frequency 2 in Hz, little endian | Call tone frequency 3 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
78 | Call tone frequency 4 in Hz, little endian | Call tone frequency 5 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
7c | Call tone duration 1 in ms, little endian | Call tone duration 2 in ms, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
80 | Call tone duration 3 in ms, little endian | Call tone duration 4 in ms, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
84 | Call tone duration 5 in ms, little endian | Idle tone frequency 1 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
88 | Idle tone frequency 2 in Hz, little endian | Idle tone frequency 3 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
8c | Idle tone frequency 4 in Hz, little endian | Idle tone frequency 5 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
90 | Idle tone duration 1 in ms, little endian | Idle tone duration 2 in ms, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
94 | Idle tone duration 3 in ms, little endian | Idle tone duration 4 in ms, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
98 | Idle tone duration 5 in ms, little endian | Reset tone frequency 1 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
9c | Reset tone frequency 2 in Hz, little endian | Reset tone frequency 3 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
a0 | Reset tone frequency 4 in Hz, little endian | Reset tone frequency 5 in Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
a4 | Reset tone duration 1 in ms, little endian | Reset tone duration 2 in ms, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
a8 | Reset tone duration 3 in ms, little endian | Reset tone duration 4 in ms, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
ac | Reset tone duration 5 in ms, little endian | Record delay in 200ms | Call display mode |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
b0 | Call-sign display color | Enable simplex repeater | GPS ranging interv. in sec. | Enable speaker in simpl. rep. |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
b4 | Show current contact | Key sound adjustable | 0 0 0 0 |KNL|KBL|SKL|PKL| SimplRepSlot 0=TS1 1=TS2 2=CH |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
b8 | Show last call on startup | SMS format | GPS units | |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
bc | Auto repeater lower VHF frequency, in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
c0 | Auto repeater upper VHF frequency, in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
c4 | Auto repeater lower UHF frequency, in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
c8 | Auto repeater upper UHF frequency, in 10Hz, little endian |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
cc | Auto repeater B direction | AddrBk is sent with own code | Enable default boot channel | Boot zone A idx |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
d0 | Boot zone B idx | Boot ch A idx, 0xff=VFO | Boot ch B idx, 0xff=VFO | Enable keep last caller |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
d4 | RX Backlight delay | Display mode | ManDial GrpCall hgn time sec. | ManDial PrvCall hgn time sec. |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
d8 | |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
dc | |
+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+
Field description:
- Display mode: 0x00=Channel, 0x01=Frequency
- VFO frequency step: 0x00=2.5kHz, 0x01=5kHz, 0x02=6.25kHz, 0x03=10kHz, 0x04=12.5kHz, 0x05=20kHz, 0x06=25kHz, 0x07=30kHz, 0x08=50kHz
- Squelch level: 0x00=Off, 0x01=1, ..., 0x05=5
- Automatic shutdown time: 0x00=Off, 0x01=10min, 0x02=30min, 0x03=60min, 0x04=120min
- Power save mode: 0x00=Off, 0x01=1:1, 0x02=2:1
- VOX sensitivity: 0x00=Off, 0x01=1, ..., 0x03=3
- Work mode A/B: 0x00=VFO, 0x01=MEM
- Work mode main channel: 0x00=A, 0x01=B
- TBST frquency: 0x00=1000Hz, 0x01=1450Hz, 0x02=1750Hz, 0x03=2100Hz
- GPS Time zone: 0x00=GMT-12, ..., 0x0c=GMT, 0x19=GMT+13
- Boot display: 0x00=Default, 0x01=Custom Text, 0x02=Custom Image
- VFO scan type: 0x00=TO, 0x01=CO, 0x02=SE
- Key press function: 0x00=Off, 0x01=Voltage, 0x02=Power, 0x03=Repeater, 0x04=Reverse, 0x05=Digital Encryption, 0x06=Call, 0x07=VOX,
0x08=V/M, 0x09=Sub PTT, 0x0a=Scan, 0x0b=FM, 0x0c=Alarm, 0x0d=Record Switch, 0x0e=Record, 0x0f=SMS, 0x10=Dial,
0x11=GPS Information, 0x12=Monitor, 0x13=Main Ch. switch, 0x14=HotKey 1, ..., 0x19=HotKey 6, 0x1a=Work Alone,
0x1b=Nuisance Delete, 0x1c=Digital Monitor, 0x1d=Sub Ch Switch, 0x1e=Priority Zone, 0x1f=Programming Scan,
0x20=MIC sound quality, 0x21=Last call reply, 0x22=Channel type switch, 0x23=Simplex repeater, 0x24=Max. volume,
0x25=Ranging, 0x26=Channel ranging, 0x27=Slot switch, 0x28=Analog squelch, 0x29=Roaming, 0x2a=Zone select,
0x2b=Roaming settings, 0x2c=FixTime Mute, 0x2d=CTCSS/DCS settings, 0x2e=APRS type, 0x2f=APRS settings
- Talk permit tone: 0x00=Off, 0x01=Digital, 0x02=Analog, 0x03=Both
- STE Type: 0x00=Off, 0x01=Silent, 0x02=120deg, 0x03=180deg, 0x04=240deg
- STE freq. no signal: 0x00=Off, 0x01=55.2Hz, 0x02=259.2Hz
- VOX source: 0x00=Internal, 0x01=External, 0x02=Both
- Display brightness: 0x00=1, ..., 0x04=5
- Backlight duration: 0x00=Always, 0x01=5s, ..., 0x06=30s, 0x07=1m, ..., 0x0a=5m
- MIC gain: 0x00=1, ..., 0x04=5
- Max speaker/headphone volume: 0x00=Indoors, 0x01=1, ..., 0x08=8
- Menu exit time: (n+1)*5s
- Auto repeater A/B direction: 0x00=Off, 0x01=positive, 0x02=negative
- Digital monitor slot: 0x00=Off, 0x01=single, 0x02=both´
- Display last caller: 0x00=Off, 0x01=Show ID, 0x02=Show name, 0x03=Both
- Call display mode: 0x00=Name based, 0x01=Call-sign based
- Call-sign display color: 0x00=orange, 0x01=red, 0x02=yellow, 0x03=green, 0x04=turquoise, 0x05=blue, 0x06=white, 0x07=black
- Enable keep last caller: A channel switch keeps laster caller.
- RX Backlight delay: 0x00=Always, 0x01=1s, ..., 0x1e=30s.
- Display mode: 0x00=black background, 0x01=blue background
- Key sound adjustable: 0x00=Adjustable, 0x01=1, ..., 0x0f=15
- GPS units: 0x00=metric, 0x01=imperial
- KNL: Knob lock enable
- KBL: Keyboard lock enable
- SKL: Side key lock enable
- PKL: Professional key lock enable
- SMS format: 0x00=M-format, 0x01=H-format, 0x02=DMR standard
Member Enumeration Documentation
◆ FreqStep
|
protected |
Member Function Documentation
◆ defaultChannelAIndex()
|
virtual |
Returns the default channel index for VFO A.
Must be within default zone. If 0xff, default channel is VFO.
Reimplemented from D868UVCodeplug::GeneralSettingsElement.
◆ defaultChannelBIndex()
|
virtual |
Returns the default channel index for VFO B.
Must be within default zone. If 0xff, default channel is VFO.
Reimplemented from D868UVCodeplug::GeneralSettingsElement.
◆ setSTEFrequency()
|
virtual |
Sets the STE (squelch tail eliminate) frequency setting.
A value of 0 disables the STE. Possible values are 55.2 and 259.2 Hz.
◆ steFrequency()
|
virtual |
Returns the STE (squelch tail eliminate) frequency setting in Hz.
A value of 0 disables the STE. Possible values are 55.2 and 259.2 Hz.
The documentation for this class was generated from the following files:
- /home/hannes/Software/qdmr/lib/dmr6x2uv_codeplug.hh
- /home/hannes/Software/qdmr/lib/dmr6x2uv_codeplug.cc
